Zoom Control; Alarm Output - Sony Ipela SNC-HM662 User Manual

Zoom control

Press to zoom out, and press
Pano. (Auto Pano): Rotates 360° through a regional
view.
Note
This function cannot be used on the panoramic views.
Stop: Stops Auto Pano and Tour.
Tour: Commands the camera to consecutively display
views of the preset positions according to the preset
settings.
Pan speed
Sets the pan speed.
–5 is the slowest and 5 is the fastest.
Tilt speed
Sets the tilt speed.
–5 is the slowest and 5 is the fastest.
Zoom speed
Sets the movement of zooming in or out when
is clicked.
–5 is the smallest and 5 is the largest.
Panoramic speed
Sets the speed when the auto panoramic functions.
1 is the slowest and 5 is the fastest.
Tuor speed
Sets the pause time for each pre-set position.
Tuor speed
1
2
3
4
5
Other panel
to zoom in.
or
Staying time
(second)
6
3
2
1.5
1.2
Manual triggers
When the manual trigger is set to the event trigger in the
Event settings, you can enable the trigger by selecting
the checkbox.

Alarm output

Select the checkbox to enable the Alarm output.
Connection
You can switch between TCP and UDP (Unicast/
Multicast).
Each click switches the transmission mode of the video/
audio data between Unicast mode, Multicast mode, TCP
mode, and HTTP mode (page 14).
Configuration of the Viewer Screen
13