Administering The Camera; Basic Operations Of The Administrator Menu; How To Set Up The Administrator Menu; Configuration Of The Administrator Menu - Sony Ipela SNC-HM662 User Manual

Administering the Camera

This section explains how to set the functions of the
camera by the Administrator.
For details about monitoring the camera image, see
"Operating the Camera" on page 8.
This section explains the basic operations and each
option of the Administrator menu.
Note on the display of menu options
The setting menus of this unit will only enable options
that you can currently select. Grayed out options cannot
be selected.
Only supported functions are displayed.
Basic Operations of the
Administrator Menu
You can use the Administrator menu to set all functions
to suit the user's needs.
Click Setting in the viewer to display the Administrator
menu.
How to set up the Administrator
menu
1
Input the user name of the administrator and
password, and then log in.
The view window is displayed.
For details, see "Logging in as a user" on page 9.
2
Click Setting on the main menu.
3
Click the main menu name (example: System) on
the left side of the Administrator menu.
Click the menu to expand its submenus.
Click again to collapse the submenus.
Example: "System" menu
4
Click the submenu name.
The clicked menu appears.
5
Select the tab above the menu, then set each setting
option in the tab.
Example: "Picture" tab of "Video/Audio" menu
See page 16 for details of the menu tabs and setting
options.
6
After setting, click OK.
The settings you have made become active.
Click Cancel to nullify the set values and return to
the previous settings.
Buttons common to every menu
The following buttons are displayed on all the menus.
Click this button to confirm the settings.
Click this button to nullify the set values and return to
the previous settings.
Click this button to close the window.
Note
If you click Cancel or Close without clicking OK, the
setting will not be applied.
General notes on menus
• After changing a setting on a menu, wait at least 30
seconds before turning off the power of the camera.
If the power is turned off immediately, the new setting
may not be stored correctly.
• If the camera settings are changed while watching the
main viewer, some settings cannot be restored. To
reflect the change on the opening main viewer, click
Refresh on the web browser.
Configuration of the Administrator
menu
System
Displays the System menu. ("Configuring the System —
System Menu" on page 16)
Video / Audio
Displays the menu for setting the camera image and
audio. ("Setting the Camera Image and Audio — Video
/ Audio Menu" on page 18)

Basic Operations of the Administrator Menu

15