Ipv6 Setting; Port Tab - Sony Ipela SNC-HM662 User Manual

IP address
Type the IP address of the camera.
Subnet mask
Type the subnet mask.
Default gateway
Type the default gateway.
Primary DNS server
Type the IP address of the primary DNS server.
Secondary DNS server
Type the IP address of the secondary DNS server.

IPv6 setting

Configure the IPv6 network setting.
Select the checkbox to enable the IPv6 setting.
To obtain the IPv6 address automatically
Deselect Use fixed IP address.
The IP address, prefix length and default gateway are
assigned automatically.
Note
If you obtain an IP address automatically, ask the
network administrator whether an IPv6 address can be
assigned.
This function is not available in a multi-prefix
environment. The transmission may not work properly.
IPv6 information
Click IPv6 information to obtain its information.
Refers to Ethernet
Link-global IPv6 address/network mask
22
Configuring the Network — Network Menu
Link-local IPv6 address/network mask
To link to the IPv6 address, follow the procedure below.
1
Open your web browser.
2
Enter the link-global or link-local IPv6 address in
the address bar of your web browser.
Memo
The address format should be:
3
Press Enter on the keyboard or click the Refresh
button to refresh the webpage.
Note
If you have a Secondary HTTP port (the default value is
8080), you can also link to the webpage in the following
address format: (See HTTP streaming for detailed
information.)
IPv6 address
To specify the fixed IPv6 address manually
Select Use fixed IP address. Type the address in the IP
address / Prefix length, Default gateway and Primary
DNS server.
IP address / Prefix length
Type the IP address of the camera and the prefix length
value.
Default gateway
Type the default gateway.
Primary DNS server
Type the IP address of the primary DNS server.
OK/Cancel
See "Buttons common to every menu" on page 15.

— Port Tab

Secondary HTTP port