Qos; Rtsp Streaming; Multicast Image 1-3 (Rtsp) - Sony Ipela SNC-HM662 User Manual

Hide thumbs Also See for Ipela SNC-HM662:
Table of Contents

Advertisement

RTSP streaming

Access name for image 1-3
Type access names for image 1-3.
RTSP port number
Set the port number used for RTSP streaming.
Memo
The port specified here is used when TCP is selected in
other settings on the viewer window.
RTP video port number
Specify the transmission port number of the video data.
Specify an even number from 1024 to 65534. Two port
numbers are used for video data communication and
control. These are, the even number specified, and the
next odd number (RTCP video port number).
Note
In software version 1.1 or later, the video port number
specified for unicast streaming (page 23) is displayed.
RTP audio port number
Specify the transmission port number of the audio data.
Specify an even number from 1024 to 65534. Two port
numbers are used for audio data communication and
control. These are, the even number specified, and the
next odd number (RTCP audio port number).
Note
Be sure to specify different numbers for the video port
number and audio port number.
24
Configuring the Network — Network Menu

Multicast image 1-3 (RTSP)

Click the items to configure the settings for multicast
image 1-3.
Enable
Select the checkbox to allow RTSP multicast sending.
Multicast address
The multicast address used for RTSP multicast
streaming.
The address set for multicast streaming (page 23) is
displayed.
Video port number
Specify the H.264 video transmission port number used
for the RTSP multicast streaming. Specify an even
number from 1024 to 65534. Two port numbers are used
for video data communication and control. These are,
the even number specified, and the next odd number
(RTCP video port number).
Audio port number
Specify the audio transmission port number used for the
RTSP multicast streaming. Specify an even number
from 1024 to 65534. Two port numbers are used for
audio data communication and control. These are, the
even number specified, and the next odd number (RTCP
audio port number).
Note
Be sure to specify different numbers for the video port
number and audio port number.
OK/Cancel
See "Buttons common to every menu" on page 15.

QoS

You can mark the data traffic packets sent from the
device and configure the settings for QoS control.
QoS/DSCP

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents