Storage Assignment To Camera; Deletion Of External Storage Device; Stopping Recording - Sony IPELA NSR-100 System Setup Manual

2-2-3. Storage Assignment to Camera

1. Open "Configuration" screen, and then from the menu tree, open the main screen of the camera to be
covered with the added storage device.
2. Assign the added storage device to the recording type to be covered in "Storage Settings".
For, example, assign "nfs1" to "Alarm Recording" when you want to assign the added storage
device "nfs1" to alarm recording,
After setting, click "Save" upper right.
3. Reboot the NSR.
3.

Deletion of External Storage Device

This section describes procedures to remove the external storage device for stopping recording to the
storage device.
3-1.

Stopping Recording

1. Stop recordings to the external storage to be removed as follows.
Stop all of alarm recording, manual recording, and normal recording for all cameras.
[For alarm recording/normal recording]
Configuration screen → REC Schedule
[For manual recording]
Monitoring screen → Select any one of monitor windows. → Click "2. Recording Status" in the
Option window. → Double-click the name of the camera. Perform it for all cameras. → Click the
recording stop button.
(Refer to User's Guide.)
2. Proceed to the next section.
NSR-100/50/25 SYSETUPV3
11 (E)