Mellanox Technologies IS5025D-1BRC User Manual page 9

QDR InfiniBand Switch Platform User Manual
Table 1 - Revision History Table
Date
April 2010
April 2010
January 2010
January 2010
December 2009
October 2009
September 2009
September 2009
September 2009
Revision Description
Rev 1.8 Added appendix with instructions for bringing the power cord from one side of
the switch to the other in a full rack.
Added Safety Warnings in Spanish
Rev 1.7 Removed DDR switches.
Rev 1.6 Added instructions in the installation section regarding putting the power cord
through the bracket Figure 15 and note on page 26.
Removed DDR switches.
Rev 1.5 Updates figures to include the power side I2C connector.
Added Section 3.3.2.5 I2C Interface on the power side of the switch
Rev 1.4 Added Chapter 6 regarding FabricIT-EFM licensing information.
Added Chapter 2Management modules and CPU connections
Section 4.3 on unmanaged switches including
The I2C connector should only be used when the FW cannot be updated in-
band.
Rev 1.3 Fixed Depth of Standard switch in the Spec sheets
Added RJ45 console pinout to appendix.
Fixed Status Fan LED info on page 13. Added to Troubleshooting section.
Updated power numbers
Added IS5025Q-2SRC, IS5025Q-2BRC model numbers
Rev 1.2 Added Spec sheets for IS5025 and IS5035
updated revision table
Rev 1.1 Updated power numbers
Rev 1.0 Initial Release
Mellanox Technologies
Rev 3.4
9