Fitting the door panels
•
Perforate the doors as in the drawing and insert
the two screws in the bag (do not tighten them all
the way down) for doors.
•
Before installing the doors, carefully level the
appliance.
•
Open one of the two lower doors and insert the
screws that had previously been positioned inside
the slot on the hinge and on the adjustment plate.
Move the door until it is perfectly in position.
•
Repeat the operations for the other doors
•
Shut the door again and check that it is
positioned at the requested height. If necessary,
use the adjustment screws situated above the
plate and the hinge.
•
Use the same adjustment screws to align the
doors vertically.
300
300
85
85
TOP
TOP
RIGHT-HAND
LEFT-HAND
FRONT PANEL
FRONT PANEL
3 MIN
BOTTOM
BOTTOM
RIGHT-HAND
LEFT-HAND
FRONT PANEL
FRONT PANEL
305
305
80
80
444 MIN.
447 MAX.
A
A
29