Fitting The Plinth - Electrolux ERG47800 Instruction Book

Fitting the plinth

Alignment height of 820 mm
• If using a 140 to 170 mm plinth, make a cut-out
as shown.
• If using a plinth higher than 100 mm but less than
140 mm, cut the height compensation strip
supplied with the appliance to the required depth
and fit it between the plinth and the ventilation
griile, pressing it into position below this grille.
• If using a 100 mm plinth, fit the complete height
compensation strip.
Alignment height of 870 mm
• If using a 190 to 220 mm plinth, make as shown.
• If using a plinth higher than 150 mm but less than
190 mm, cut the height compensation strip
supplied with the appliance to the required depth
and fit it between the plinth and the ventilation
grille.
• If using a 150 mm plinth, fit the complete height
compensation strip.
• If the appliance is installed at the end of a row of
units, insert foot E to hold the plinth in place.
820
870
170
220
140
190
30
100
140
190
30
100
E
100
150
31