Table of Contents
Advertisement
Use of the refrigerator
Control Panel
J
ON/OFF light
K
Fridge button ON/OFF
L
Temperature setting button (warmest)
M
Temperature indicator
N
Temperature setting button (coldest)
O
Super Cooling light
P
Suoper Cooling button
Q
D.A.C. light
R
D.A.C. button
J. Light ON/OFF
K. Button ON/OFF
ON:
Press the button (K). The pilot light (J)
switches on.
OFF: Keep press the button (K) until the pilot light
(J) and the temperautre indicator switched off.
L - N. Temperature setting buttons
The temperature can be adjusted between +2°C and
+8°C.
By pressing the button (L or N), the current
temperature setting flashes on the indicator. It is
possible to modify the setting temperature only with
flashed indicator. To set a warmer temperature,
press button (L). To set a colder temperature, press
button (N). The indicator display the newly selected
temperature for a few seconds and then shows
again the inside compartment temperature.
The newly selected-temperature must be reached
after 24 hours.
Attention!
During the stability period by the first starting the
temperature displayed can not correspond to the
setting temperature. During this time it is possible
that the temperature displayed is lower than the
setting temperature.
M. Temperature indicator
During normal functioning the indicator shows the
temperature inside the fridge.
Attention!
Difference between the temperature displayed and
temperature setting is normal. Especially when:
-
a new setting has recently been selected
-
the door has been left open for a long time
-
warm food has been placed in the compartment
O. Super Cooling pilot light
P. Super Cooling button
The maximum performance is obtained by setting
the Super Cooling function. It's recommended when
loading large quantities of food.
Press the Super Cooling button (P).The relevant pilot
light (O) switches on.
The internal temperature goes down to +2°C.
After about 6 hours the supercooling function switches
off automatically.
Q. D.A.C. light
The D.A.C. light is on by pushing the D.A.C. button.
R. D.A.C. button
Push the D.A.C. button the light will light up.
Operation
Insert the plug in the power socket. Press the button
ON/OFF (K). The fridge is switched on.
The fridge is pre-set to run at +5°C. This
temperature will be reached in a few hours.
23
Advertisement
Table of Contents
