Center High-Mounted Stop Light (Chmsl); License Light - Chrysler TOWN & COUNTRY 2009 Owner's Manual

488 MAINTAINING YOUR VEHICLE
5. Replace the bulb, reinstall the socket, and reattach the
light assembly.

Center High-Mounted Stop Light (CHMSL)

The CHMSL uses LED lights that are not serviceable
separately. The CHMSL must be replaced as an assembly,
see your authorized dealer.

License Light

The light for the license plate light is located under the
tailgate light bar and above the license plate.
1. Using a small screwdriver, press inward the locking
tab on the outboard side of the light assembly and pull
down on the light assembly for removal.
2. Twist and remove the socket from the light assembly
and pull the bulb out to remove.
3. Push the bulb into the socket, twist the socket into the
light assembly and reinstall the light assembly into place
ensuring the locking tab is secure.