Windows; Power Vent Windows - If Equipped - Chrysler TOWN & COUNTRY 2009 Owner's Manual

The Remote Power Unlock On First Press feature can be
enabled or disabled by performing the following proce-
dure:
1. Perform this operation while standing outside the
vehicle.
2. Press the LOCK button for five to ten seconds.
3. While the LOCK button is pressed, (after five seconds)
press the UNLOCK button. Release both buttons.
The Remote Power Unlock On First Press feature can be
reactivated by repeating the above procedure or by
performing the procedure in Section Four, "Electronic
Vehicle Information Center (EVIC), Personal Settings
(Customer-Programmable Features)" on vehicles so
equipped.
For other power lock features, refer to "Remote Keyless
Entry (RKE) Transmitter" earlier in this section.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 37

WINDOWS

Power Vent Windows — If Equipped
Switches on the driver's door trim panel let the driver
operate the two vent windows from the driver's seat.
Power Vent Window Switches
1 – Open 2 – Close
2