When the desired first character appears, press
the CHANNEL selector knob momentarily to
move on to the next character.
r Select succeeding characters in the same man-
ner, pressing the CHANNEL selector knob mo-
mentarily after each selection.
r After entering the entire name (eight characters
maximum), press the [ MW ( SPL.W )] key for 2
seconds to save all data for the channel and exit.
Note: If you have stored a Weather Channel, the
" WX"))! ~ WX")!) " labels utilize the alphanu-
meric memory, and other labels may not be stored.
A l p h a - t a g C h a r a c t o r s
A l p h a - t a g C h a r a c t o r s
)
)
!
!
@ # $ % ^ & * ( A B
C D E F G H I J K L M N
O P Q R S T U V W X Y Z
< > + ; : \ ` y [ | "
26
M
O
EMORY
PERATION
Recalling the Memories
r Press the CHANNEL selector knob, repeatedly
if necessary, until "MR" (Memory Recall) ap-
pears on the display. In the MR mode, you will
see " CH" " and the previously selected channel
number appearing on the LCD.
r Rotate the CHANNEL selector knob to select
the desired memory channel.
r You may change the title structure of the Memory
display type among:
1. Channel Indication (sequential Channel Number,
2. Frequency Indication (e.g. 1@@
3. Alphanumeric Label (e.g. LAX FSS ).
r To change the Memory display title, press the
[
get the desired display title structure.
r To exit the Memory mode, press the CHANNEL se-
lector knob momentarily to return to the VFO mode.
Note: In the "Book" Memory mode, you can change
memory channels in 10 channel steps: press the [ F ]
key momentarily, then rotate the CHANNEL selec-
tor knob. The " " icon will show at the right edge
of the display when the 10 channel step tuning mode
is active. Press the [ F ] key once more to resume nor-
mal channel selection in 1 channel steps.
VXA-200 A
e.g. CH"))! , CH"))@ , etc.);
(
)] key repeatedly, if necessary, until you
P
II O
VIATOR
ILOT
PERATING
.
%)) ); or
M
ANUAL