Creating A New Macro - Sunwave Tech. SRC-3810 User Manual

SRC-3810 User's Manual

Creating a New Macro

Follow these steps to create a new macro:
1. Press or
2. Press
3. Press the device key you
want to use for this macro
(for example TV), and then
press any key to define as
the macro key. You hear
three beeps to indicate that
macro creation mode has
started.
Note: If you select a key that
already has a macro stored
in it, the new macro will
replace the old macro.
4. Press the key or button
sequence that you want to
record.
5. Press . You enter the Delay
and Save screen. Do one of
the following:
• Enter the number of
seconds you want to
delay between each
command. For example,
if you want a six second
delay between turning
on your TV and then
turning on your VCR,
press '6'.
• Press
macro and exit macro
creation mode.
26
to select
.
to save the
NEW
.