Touch Screen Precautions; Touch Screen Buttons; Using Hard Keys - Sunwave Tech. SRC-3810 User Manual

SRC-3810 User's Manual

Touch Screen Precautions

Please read the following instructions carefully:
• Tap the LCD Touch Screen gently; never use force.
• Do not use a pen or any sharp object to tap the
screen. You might damage the surface.
• Keep the Touch Screen dry. Wipe off any spills
immediately. The SRC-3810 is not waterproof; never
immerse it in liquid.
• Don't expose the SRC-3810 to extreme temperatures.
Keep it away from heat sources.
• Avoid dropping the SRC-3810.
• Don't drop anything on the Touch Screen.
• Clean the LCD Touch Screen with a soft cloth. If
needed, dampen the cloth slightly before cleaning.
Never use abrasives or cleaning solutions.

Touch Screen Buttons

The Touch Screen buttons enable you to operate the
SRC-3810 and your external devices. Use these buttons
to program codes from your existing remotes, control
your devices, and set up command sequences called
macros. You will hear a beep when you press a button.
To activate or deactivate the beep, see Setting the
Beep Signal on page 38. The SRC-3810 turns itself off
after a user specified time. To change the time, see
Setting the Power Down Time on page 36.

Using Hard Keys

The buttons on the bottom part of the SRC-3810
enable you to operate devices as well as program the
SRC-3810.
6