Creating A New Macro - Sunwave Tech. 3815 User Manual

SRC-38 SERIES User's Manual

Creating a New Macro

Follow these steps to create a new macro:
1. Press or
2. Press
3. Press the device key you want
to use for this macro (for
example TV), and then press
any key to define as the
macro key. You hear three
beeps to indicate that macro
creation mode has started.
Note: If you select a key that
already has a macro or code
stored in it, the new macro will
replace the old macro.
4. Press the key or button
sequence that you want to
record.
5. Press . You enter the Delay
and Save screen. Do one of
the following:
• Enter the number of
seconds you want to
delay between each
command. For example, if
you want a six second
delay between turning on
your TV and then turning
on your VCR, press '6'.
• Press
and exit macro creation
mode.
28
to select
.
to save the macro
NEW
.