Code Menu
Enter the setup menus, scroll to Code and press
enter the code menu. In the code menu, press
to scroll through the code menu options:
Pre-Code
•
all buttons on the SRC-3810 for use with a specific
manufacture model number. This feature is the fastest
way to program the SRC-3810 but requires that your
device be located in the Pre-programmed Code List
that was bundled with the SRC-3810. Some newer or
less-common devices may not be pre-programmed
and must be learned using the Learning Function.
Learn
•
infrared signals from another remote control. This
method is perfect for newer or less common devices
or if a certain button still not does perform the desired
function after using pre-programmed manufacturer
codes; however, not 100% of codes can be learned
and it may be necessary to collect unrecognized
codes and send them to Sunwave. (See page 22 for
more information on unrecognized code collection.)
Del Key
•
Del Bank
•
Debug
•
codes for debugging purposes
: use this method to automatically configure
: use this method to directly learn the proper
: erases the key code
: erases the device code
: collects unrecognizable (un-learnable) infrared
Code Menu
to
and
15