Chapter 3-Setting Up The Src-93 Series To Control A Device; Choosing A Device; Creating A New Device - Sunwave Tech. SRC-3310/9320 User Manual

Chapter 3-Setting Up the SRC-93 SERIES to
Control a Device
Before the SRC-93 SERIES can be used to control a
device, it needs to be configured to display your
existing remote control buttons and also programmed
to send the correct infrared signals.
This chapter guides you through the Touch Screen
layout and SRC-93 SERIES setup procedure.

Choosing a Device

The first step is to choose a device to setup. This could
be a new TV, DVD, or VCR etc... You will give this
specific device a name (label) on the SRC-93 SERIES.
There are two ways to do this based on what starting
point you want to work from:
• Create new Device: Use this method for a totally new
device.
• Modify Existing Device: Use this if you are having a
problem with an already setup device and want to
make a change or enhancement.

Creating a New Device

To create a new device, follow these steps:
Press and hold the SETUP button on the
Touch Screen.
Press each number button (2, 4, 6, 8) until it
disappears.
Use the arrow buttons on the Touch Screen
to select NEW and then press the OK button.
13