Using Code Learning Mode - Sunwave Tech. SRC-3810 User Manual

SRC-3810 User's Manual

Using Code Learning Mode

Follow these instructions to enable the SRC-3810 to
detect and learn a remote control's configuration.
Before Using the Learning Function
Before you start using the SRC-3810's learning function,
please heed the following precautions:
• Not all infrared codes are learnable by the SRC-3810.
You may need to first collect the codes (see page 22
for more information) and then email them to
Sunwave. New system firmware will be sent to you
allowing your SRC-3810 to learn the codes.
• To change from a device that has already been
programmed, delete all of the commands or the first
device before teaching new ones. For example, to
operate the living room TV instead of the bedroom TV,
delete all commands for the bedroom TV first. Then re-
configure the TV device screen for the living room TV.
•
•
•
18
Code learning does not work with all devices.
Select one device screen in advance before
using code-learning mode.
All keys except the quick channel keys, sleep,
page , and macro keys can be learned.