Creating A New Macro - Sunwave Tech. SRC-3820 User Manual

Creating a New Macro

The section instructs you how to create a macro key.
A macro key is allowed to store at most 60
commands.
1. Select
NEW
2. Tap
3. Tap the target device that you
desire to put the macro key in (TV for
example). If it is successful, you will
hear three beeps.
Note: When the key stores new
macro commands, it will
replace original data.
4. Assign a key to be the macro key.
Start to input commands, and they
all will be stored in the macro key
one after another until you input a
time delay or save settings. Please
press
5. If you want to input a time delay,
please tap the number key and tap
to confirm. At the time, the
system will go back to last screen as
step 4 in order for you to set up other
commands. Until you finish setting,
please press
settings and exit.
option.
to confirm.
to proceed
two times to save
Using Macros
23