Grandstream Networks HandyTone-486 User Manual page 22

HandyTone-486 User Manual
Send Flash Event This parameter allows the user to control whether to send an SIP
FXS Impedance
NTP server
Time Zone
Daylight Savings
Time
Send Anonymous If this parameter is set to "Yes", the "From" header in outgoing INVITE
Lock keypad
update
WAN side http
access
NOTIFY message indicating the Flash event, or just to switch to the
voice channel when the user presses the Flash key.
Selects the impedance of the analog telephone connected to the Phone
port.
This parameter defines the URI or IP address of the NTP server which
the HandyTone ATA will use to display the current date/time.
This parameter controls how the displayed date/time will be adjusted
according to the specified time zone.
This parameter controls whether the displayed time will be daylight
savings time or not. If set to Yes, then the displayed time will be 1 hour
ahead of normal time.
message will be set to anonymous, essentially blocking the Caller ID
from displaying.
If this parameter is set to "Yes", the configuration update via keypad is
disable.
If this parameter is set to "No", the HTML configuration update via WAN
port is disable.
22
Grandstream Networks, Inc.