Grandstream Networks HandyTone-486 User Manual page 18

HandyTone-486 User Manual
No Key Entry
Timeout:
Use # as Dial Key:
local SIP port:
Local RTP port:
Use random port:
NAT Traversal:
keep-alive interval:
Use NAT IP
message)
TFTP Server:
SUBSCRIBE for
MWI:
Offhook Auto-Dial:
Enable Call
Features
locally)
Disable Call-
Waiting:
Send DTMF:
DTMF Payload
Type:
Send Flash Event:
FXS Impedance:
NTP Server:
Time Zone:
Daylight Savings
Time:
time)
Send Anonymous:
Lock keypad
update:
WAN side http
access:
4
(in seconds, default is 4 seconds)
No Yes (if set to Yes, "#" will function as the "(Re-)Dial" key)
5060
(default 5060)
5004
(1024-65535, default 5004)
No Yes
No
Yes, STUN server is:
20
(in seconds, default 20 seconds)
67 153 142 66
. . .
No, do not send
Yes, send periodical SUBSCRIBE for Message Waiting Indication
No Yes (if Yes, Call Forwarding & Do-Not-Disturb are supported
No Yes
in-audio via RTP (RFC2833)
101
No Yes (Flash will be sent as a DTMF event if set to Yes)
time.nist.gov
No Yes (if set to Yes, display time will be 1 hour ahead of normal
No Yes (caller ID will be blocked if set to Yes)
No Yes (configuration update via keypad is disabled if set to Yes)
No Yes (WAN side access to http server will be rejected if set to No)
(if specified, this IP address is used in SIP/SDP
(for remote software upgrade and configuration)
SUBSCRIBE for
(User ID/extension to dial automatically when offhook)
(URI or IP address)
18
Grandstream Networks, Inc.
(URI or IP:port)
Message Waiting
via SIP INFO
Indication