Possibilities For Insertion - Electrolux EHG30835X Instruction Book

Possibilities for insertion

Kitchen unit with door
Proper arrangements must be taken in
designing the furniture unit, in order to avoid
any contact with the bottom of the hob which
can be heated when it is operated. The
recommended solution is shown in Fig. 12.
The panel fitted under the hob should be easily
removable to allow an easy access if a
technical assistance intervention is needed.
Kitchen unit with oven
The hob recess dimensions must comply the
indication given in Fig. 11 and must be
provided with brackets to allow a continuous
supply of air.
To avoid overhating, the building in should be
carried out as shown in Figs. 13 and 14.
The hob electric connection and the oven one
must be carried out separately, both for safety
reasons and to allow the oven to be easily
taken off the unit.
Hanging furniture units or hoods must be
placed at 650 mm. minimum from the hob (Fig.
11).
In case a hood with lenght of 600 mm. is fitted
over the hob, the hanging furniture units beside
the hood must be placed at 550 mm. minimum
from the hob, to allow the fitting and the correct
use of the lid, if required.
Fig. 11
Fig. 12 Fig. 13 Fig. 14
FO 1013
FO 0939 FO 0938
a) Removable panel
b) Space possibly useful for
connections
66