Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Electrolux EHG 30810
Summary of Contents for Electrolux EHG 30810
- Page 1 Gas-Hob USER MANUAL Mod. EHG 30810 35692-3403 MY-TH-SG...
-
Page 2: Important Safety Information
English Important Safety Information These warnings are provided in the interest of safety. You read them carefully before MUST installing or using the appliance. About Installation, Cleaning and Maintenance • Under no circumstances should you attempt to repair the appliance yourself. Repairs carried out by •... -
Page 3: Table Of Contents
............9 Building In ............10 MANUFACTURER: MANUFACTURER: MANUFACTURER: MANUFACTURER: MANUFACTURER: ELECTROLUX HOME PRODUCTS ITALY S.p.A. Possibilities for insertion ......... 11 Viale Bologna, 298 European Guarantee 47100 FORLÌ (Italy) Description of the appliance 1 Ultra-Rapid Burner - 4,0 kW... -
Page 4: Cleaning And Maintenance
If you cannot light the flame even after several attempts, check the "cap" (Fig. 1 lett. A) and the "crown" (Fig. 1 lett. B) are in the correct position. To put the flame out, turn the knob to the symbol . In the absence of electricity, ignition can occur without the electrical device;... -
Page 5: Guarantee - After Sales Service
Guarantee - After Sales Service Service and original spare parts Original spareparts, certified by the product This machine, before leaving the factory, has been manufacturer and carrying this symbol are only available tested and studied by many experts and specialists, in at our Service Centre and authorized spareparts shops. -
Page 6: Technical Data
Technical Data Gas Burner Rating This appliance complies with the following Ultra-Rapid Burner 4,0 kW Directives: 3,7 kW (town gas) 2006/95 (Low Voltage Directive); 89/336 (Electromagnetical Compatibility Directive); Class Appliance 90/396 (Gas Appliances) Setting Liquid Gas G30/G31 28 - 30 mbar 93/68 (General Directives) Gas connection G 1/2"... -
Page 7: Gas Connection
Gas connection Choose fixed connections or use a flexible pipe in stainless steel in compliance with the regulation in force. If using flexible metallic pipes, be careful they do not come in contact with mobile parts or they are not squeezed. -
Page 8: Electrical Connection
Electrical Connection The appliance is designed to be connected to 220 / 240 V monophase electricity supply. The connection must be carried out in compliance with the laws and regulations in force. Before the appliance is connected: 1. check that the main fuse and the domestic installation Neutral can support the load (see the rating label);... -
Page 9: Adaptation To Different Types Of Gas
Adaptation to different types of gas Replacing the burner injectors Town gas 1. Remove the pan supports. 2. Remove the burner's caps and crowns. 3. With a socket spanner 7 unscrew and remove the injectors (Fig. 6), and replace them with the ones required for the type of gas in use (see Table 2). -
Page 10: Building In
Building In Dimensions are given in millimetres These hobs can be inserted in a built-in kitchen unit whose depth is between 550 and 600 mm. The hobs dimensions are shown in Fig. 8. Installation and assembly These hobs can be installed in a kitchen unit with an opening for insertion whose dimensions are shown in Fig. -
Page 11: Possibilities For Insertion
Possibilities for insertion Kitchen unit with door Proper arrangements must be taken in designing the forniture unit, in order to avoid any contact with the bottom of the hob which can be heated when it is operated. The recommended solution is shown in Fig.11. -
Page 12: European Guarantee
European Guarantee This appliance is guaranteed by Electrolux in each of the countries listed below for the period specified in the appliance guarantee or otherwise by law. If you move from one of these countries to another of the countries listed below the appliance guarantee will move with you subject to the following qualifications:- ·... - Page 16 02/08...