Asus P5AD2 DELUXE User Manual page 146

Rebuilding a RAID array Rebuilding a RAID array Rebuilding a RAID array Rebuilding a RAID array Rebuilding a RAID array
This option allows you to reconstruct an existing RAID array. This option
applies only to RAID1 (Mirrored) or RAID 0+1(Striped+Mirrored) sets.
To rebuild a RAID array:
1. From the IT8212 Setup Utility screen, press <4>. The following screen
appears.
IT8212 Setup Utility (C)Copyright 2002-2004 ITE, Inc.
Array No
Array 0
Array 1
Array 2
Array 3
∗ ∗ ∗ ∗ ∗ : Capacity (GB)
[↑ ↑ ↑ ↑ ↑ ] Up
2. Use the up or down arrow keys to select a RAID array, then press
<Enter> to rebuild. The following screen appears.
IT8212 Setup Utility (C)Copyright 2002-2004 ITE, Inc.
Channel ID
Pri/D1
Channel ID
Sec/D1
Channel ID
Pri/D1
Sec/D1
∗ ∗ ∗ ∗ ∗ : Capacity (GB)
[↑ ↑ ↑ ↑ ↑ ] Up
5 - 3 6 5 - 3 6
5 - 3 6 5 - 3 6 5 - 3 6
[ Rebuild RAID Menu ]
Array Mode Drive No
Stripe 4
Mirror 2
---- ----
---- ----
[↓ ↓ ↓ ↓ ↓ ] Down
[ Source Drive ]
Drive Name
XXXXXXXXXX
[ Target Drive ]
Drive Name
XXXXXXXXXX
[ Drive List]
Drive Name
XXXXXXXXXX
XXXXXXXXXX
[↓ ↓ ↓ ↓ ↓ ] Down
Size(MB)
XXXXXX Functional
XXXX Functional
-----
-----
♦ ♦ ♦ ♦ ♦ : Bootable Array
[Enter] Select
Size (MB)
Size (MB)
Size (MB)
[Enter] Select
C h a p t e r 5 : S o f t w a r e s u p p o r t C h a p t e r 5 : S o f t w a r e s u p p o r t
C h a p t e r 5 : S o f t w a r e s u p p o r t C h a p t e r 5 : S o f t w a r e s u p p o r t C h a p t e r 5 : S o f t w a r e s u p p o r t
Status
-----
-----
[ESC] Exit
XXXXX
XXXXX
XXXXX
XXXXXX
[ESC] Exit