Table of Contents
Advertisement
Creating a RAID 0 set (Striped)
Creating a RAID 0 set (Striped)
Creating a RAID 0 set (Striped)
Creating a RAID 0 set (Striped)
Creating a RAID 0 set (Striped)
To create a RAID set:
1.
From the Silicon Image configuration utility main menu, select C r e a t e
R A I D s e t
R A I D s e t
R A I D s e t then press <Enter> to display an option menu.
R A I D s e t
R A I D s e t
2.
Select R A I D 0
R A I D 0 then press <Enter> to display the following.
R A I D 0
R A I D 0
R A I D 0
3.
Select your desired method of configuration.
A u t o c o n f i g u r a t i o n
A u t o c o n f i g u r a t i o n
A u t o c o n f i g u r a t i o n
A u t o c o n f i g u r a t i o n
A u t o c o n f i g u r a t i o n
a. Select Auto Configuration the press <Enter>.
b. The utility prompts a confirmation message, press <Y>.
By default, Auto configuration sets the stripe size to 64K and sets the
logical drives based on the physical drives installed.
5 - 2 0
5 - 2 0
5 - 2 0
5 - 2 0
5 - 2 0
MAIN MENU
Create RAID set
Delete RAID set
Rebuild Raid1 set
Resolve Conflicts
Low Level Format
Logical Drive Info
MAIN MENU
Auto configuration
Manual configuration
RAID0
RAID1
RAID10
SPARE DRIVE
C h a p t e r 5 : S o f t w a r e s u p p o r t
C h a p t e r 5 : S o f t w a r e s u p p o r t
C h a p t e r 5 : S o f t w a r e s u p p o r t
C h a p t e r 5 : S o f t w a r e s u p p o r t
C h a p t e r 5 : S o f t w a r e s u p p o r t
C r e a t e
C r e a t e
C r e a t e
C r e a t e
Advertisement
Table of Contents
