Table of Contents
Advertisement
Creating a RAID 1 set (Mirrored)
Creating a RAID 1 set (Mirrored)
Creating a RAID 1 set (Mirrored)
Creating a RAID 1 set (Mirrored)
Creating a RAID 1 set (Mirrored)
To create a RAID 1 set:
1.
From the Silicon Image configuration utility main menu, select C r e a t e
R A I D s e t
R A I D s e t then press <Enter>. The following sub-menu appears.
R A I D s e t
R A I D s e t
R A I D s e t
2.
Select R A I D 1
R A I D 1 then press <Enter> to display the following.
R A I D 1
R A I D 1
R A I D 1
3.
Select your desired method of configuration.
A u t o c o n f i g u r a t i o n
A u t o c o n f i g u r a t i o n
A u t o c o n f i g u r a t i o n
A u t o c o n f i g u r a t i o n
A u t o c o n f i g u r a t i o n
a. Select Auto Configuration then press <Enter>.
b. The utility prompts a confirmation message. Press <Y> to confirm
or <N> to return to the configuration Main Menu.
•
•
5 - 2 2
5 - 2 2
5 - 2 2
5 - 2 2
5 - 2 2
MAIN MENU
Create RAID set
Delete RAID set
Rebuild Raid1 set
Resolve Conflicts
Low Level Format
Logical Drive Info
MAIN MENU
Auto configuration
Manual configuration
Auto-configuration creates a RAID 1 set without backup copy.
When migrating a single hard disk drive to a RAID 1 set, use of the
Manual configuration is recommended.
RAID0
RAID1
RAID10
SPARE DRIVE
C h a p t e r 5 : S o f t w a r e s u p p o r t
C h a p t e r 5 : S o f t w a r e s u p p o r t
C h a p t e r 5 : S o f t w a r e s u p p o r t
C h a p t e r 5 : S o f t w a r e s u p p o r t
C h a p t e r 5 : S o f t w a r e s u p p o r t
C r e a t e
C r e a t e
C r e a t e
C r e a t e
Advertisement
Table of Contents
