Erasing Existing Programming; Erasing Learned Buttons; Erasing Favorite Channel Button - Home Theater Master MX-500 User Manual

A. Erasing Learned Buttons
1. Go to the program setting mode by pressing both the MAIN and
ENTER buttons simultaneously for three seconds.
2. Press the ERASE button.
3. Press the LEARN button to erase learned button(s).
4. If you wish to erase all the learned functions in MX-500™, press the
ALL button and then press the SURE? button at the next to the LCD
screen. If you wish to erase all the buttons in a single device or an
individual button in the device, press the DEVICE button.
Tip) To erase the learned function in the device button itself, press the
PAGE button and then press the device button (TV, VCR, Audio,
etc.).
5. Press the device button (TV, VCR, Audio, etc.) to erase the
button(s) from the device.
6. Press the ALL button if you wish to erase all the learned buttons in
the device and press the SURE? button at the next to the LCD screen.
7. Press the KEY if you wish to erase individual buttons in that device
one at a time. This will show all the functions in the device. Press the
button you wish to erase.
8. Press the MAIN button to exit to main erase mode. Press the MAIN
button once again to exit the SET UP mode.
B. Erasing Favorite Channel Button
1. Go to the program setting mode by pressing both the MAIN and
ENTER buttons simultaneously for three seconds.
2. Press the ERASE button.
18