11. LCD Screen Alignment
You may need to align the LCD screen after you down load the
program to the MX-1000.
Enter the Setting mode by pressing both the MAIN and PAGE button
simultaneously for five seconds. Move the cursor on the LCD screen
to 1. TOUCH PAD ALIGNMENT with joystick. Press the joystick
down to enter the mode. Align the screen by pressing the three points
that appears on LCD one point at a time.
@ - Press Here (1)
To Align LCD Screen:
Press the three points
using pencil tip.
@ - Press here (2)
To Cancel:
Press Main button.
12. LCD Screen Contrast
The contrast of the LCD screen can be adjusted by pressing either the
CHANNEL UP or DOWN button while holding down the MAIN
button. Release the buttons when you reached the optimal level of
contrast.
Press Here (3) - @
27
13. Caution on LCD Screen
Please note that the LCD screen is a breakable glass. Please use
necessary caution in handling LCD screen.
14. Memory Lock
The MX-1000 has an internal memory lock system that retains all the
programs and learned functions for the extended period.
15. Erasing all the Programs
Pressing the button shown through the opening in the battery
compartment after removing the batteries from the MX-1000 will
erase all the programs in the remote control.
16. Warranty
We guarantee MX-1000 against any manufacturer defects for one year
from the date of purchase.
28