Home Theater Master MX-500 User Manual page 10

5. Select the device from which the appropriate three-digit code
n u m b e r table will be selected. (E.g. If it is the TV code table,
press the TV device button).
6. Point the remote control toward the component and enter the
three-digit code number you selected for your component from
the code table provided on page 33 - 46. (Please enter the code
number within 20 seconds of programming). If there is more than
one code number assigned to your brand, try the one code number
at a time until you find the right code number. (If you enter the
right code number, the component will turn off right after you
have entered the correct number).
7. Confirm that it is the right code by pressing Power button.
After you have confirmed that the right code is entered, save the
code by pressing the SAVE button on LCD.
8. Exit from preprogramming mode by pressing the MAIN button
and then exit from SET UP mode by pressing the MAIN button
once again.
9. Confirm you have entered the right code number that
matches your component by pressing other functional buttons. If
any of the buttons fail to operate, as they should, please repeat
from Step 1.
10. Continue to program other components by repeating from Step
1 above.
9