Programming Punch Through Functions - Home Theater Master MX-500 User Manual

You can use the audio receiver volume control in a different mode ( eg.
Audio receiver Volume Up and Volume Down and Mute in Satellite
mode) using the volume punch through feature. You can also have
channel punch through (Channel Up, Channel Down) as well as eight
VCR or DVD transport buttons, Play, Stop, Fast Forward, Rewind, Skip-,
Skip+, Pause and Record, to operate in another mode such as in Satellite,
Cable and Audio modes.
1. Enter the programming mode by pressing the MAIN and ENTER
buttons simultaneously for three seconds.
2. Press the PUNCH button in programming mode.
3. Press the VOL button on the LCD for Volume Punch Through, the
PLAY for Transport Punch Through and the CH for Channel Punch
Through.
4. Select the device you wish to punch through to (1st device e.g.
Satellite receiver).
5. Select the device you wish to punch through from (2nd device e.g.
Audio receiver).
6. Punch through is saved when the second device is pressed.
7. Repeat from Step 3 to program Punch Through for other devices.
8. Once you have completed the programming and wish to exit from
this mode, press the MAIN button.
17