Home Theater Master MX-500 User Manual page 22

3. Press the VOL button on the LCD for Volume Punch Through, the
PLAY for Transport Punch Through and the CH for Channel Punch
Through you wish to erase.
4. Press the DEVICE button you wish to erase punch through.
5. Press the same DEVICE button once again.
6. Punch through is erased when the same device button is pressed
the second time.
7. Repeat from Step 3 to erase the Punch Through for other
devices.
8. Exit from Punch Through mode by pressing the MAIN button
and then exit from SET UP mode by pressing the MAIN button
once again.
21