Home Theater Master MX-500 User Manual page 17

3. Press one of the ten device buttons you wish to program for macro
functions.
4. Select the device by pressing device button and then press the
functional buttons you wish to store in the device macro button you
selected. You can store up to 20 commands into the device macro
buttons.
5. Save the commands you selected to the macro button by pressing the
CH UP button.
6. Repeat from Step 3 to program other device button. Once you
complete the programming and wish to exit from this mode, press the
MAIN button. Exit from SET UP mode by pressing the MAIN button
once again.
NOTE: Pressing the PAUSE button during the macro programming
will add a time delay of 0.2 seconds between the commands. E.g.
Pressing the PAUSE button twice will create a pause of 0.4 seconds
between the commands where the delay was inserted.
16