Programming Favorite Chanenls - Home Theater Master MX-500 User Manual

You can create and program up to 50 Favorite Channel Buttons and each
favorite channel button can send out up to 10 commands with one button press.
1. Go to the program setting mode by pressing both the MAIN and
ENTER buttons simultaneously for three seconds.
2. Press the FAV Button on the LCD.
3. Press the appropriate device button from which the channel number
will be selected.
4. Go to one of the five LCD pages by pressing the FAV(or PAGE) button.
Press the button you will be assigning to the favorite channel and enter
the channel number you wish to store in the FAVORITE channel
button. You can store up to 10 commands.
TIP) If you pressed a wrong channel number, please move the
cursor by using left or right button of the joystick and then prcss
the correct channel number.
5. Press the favorite channel button you selected in Step 4 again to store
the channel you programmed.
6. Once you completed the programming and wish to exit from the
FAVORITE CHANNEL mode, press the MAIN button. Exit from SET
UP mode by pressing the MAIN button once again.
Note: There are five pages of LCD screens for favorite channel
programming. You move to other pages by pressing the PAGE or FAV button.
14