Power Management Setup - AOpen I975XA-YDG Manual

Power Management Setup

The Power Management Setup screen enables you to control the motherboard
green features. See the following screen.
Power Management > ACPI Suspend Type
This function allows you to select suspend types. S1 is Power On Suspend and S3
is Suspend to RAM.
Available Options: S1, S3, S1 & S3
Power Management > Run VGABIOS if S3 Resume
Power Management > Wake-up by PCI Card
This is a function of PCI specification 2.2. PCI bus supports standby current to PCI
card and PCI card can wakeup system if it detects certain activity.
Available options: Disabled, Enabled
Power Management > Power On by Ring
The option lets you specify enable or disable Wake On Modem Ring function.
Available options: Disabled, Enabled
Power Management > USB KB Wake-Up From S3
The USB KB wake-up from S3 support USB Keyboard wake up under S3 mode.
Available options: Disabled, Enabled
Power Management > Resume by Alarm
The Wake Up Timer is more like an alarm, which wakes up and powers on your
system at a pre-defined time for a specific application. It can be set to wake up
everyday or on specific date within a month. The date/time is accurate to within
a second. This option lets you enable or disable the RTC Wake Up function.
Available options: By Date, By Week, Disabled
62