AOpen I975XA-YDG Manual page 58

Integrated peripherals > OnChip IDE Device > On-Chip Secondary PCI
IDE
This item allows you to select work mode on PATA .
Available options:
Disabled: Disabled PATA Controller
Enabled: Enabled PATA Controller
Integrated peripherals > OnChip IDE Device > On-Chip Serial ATA
This item allows you to select work mode between SATA.
Available options:
Disabled: Disabled SATA Controller
Auto: Auto arrange by BIOS
Combined Mode: PATA and SATA are combine. Max. of 2 IDE drives in each
channel.
Enhanced Mode: Enable both SATA and PATA. Max. of 6 IDE drives are
supported.
SATA only: SATA is operating in legacy mode..
Integrated peripherals > OnChip IDE Device > PATA IDE Mode
When On-chip SATA is selected to "Combined Mode" , this item allows you to
set PATA to primary or secondary.
Integrated peripherals > OnChip IDE Device > SATA Port Speed Settings
Available options: Disabled, Force GENI, Force GENII
Integrated peripherals > Onboard Device > USB Controller
This item lets you enable or disable the USB controller.
Available options: Disabled, Enabled
Integrated peripherals > Onboard Device > USB 2.0 Controller
This item lets you enable or disable the USB 2.0 controller.
58