Connecting Ide And Floppy Cables - AOpen I975XA-YDG Manual

Connecting IDE and Floppy Cables

Connect the 34-pin floppy cable and 40-pin, 80-wire IDE cable to floppy
connector and IDE connector. Be careful of the pin1 orientation. Wrong
orientation may cause system damage.
Primary Primary
Slave (2nd) Master (1st)
Pin 1
IDE2 (Primary)
Pin 1
Pin 1
Primary Primary
Secondary Secondary
Slave (2nd) Master (1st)
Master (3rd)
Slave (4th)
ATA 33/66/100 IDE Connector
ATA 66/100/133 IDE Connector
Pin 1
FDD Connector
19