Page 1 1U Series Standalone DVR User’s Manual...
Page 2: Table Of Contents
Table of Contents FEATURES AND SPECIFICATIONS..............10 Overview ............................... 10 Features ..............................10 Specifications ............................11 1.3.1 Standard 1U Series ........................11 1.3.2 Simple Entry Level Series ......................15 1.3.3 Simple Lite Series ........................... 18 OVERVIEW AND CONTROLS ................. 22 Front Panel ............................
Page 3 Alarm Output Port ........................... 43 RS232..............................43 RS485..............................44 3.10 Other Interfaces ........................... 45 3.10.1 Standard 1U Series........................45 3.10.2 Simple entry level series ......................45 3.10.3 Simple lite series ........................45 OVERVIEW OF NAVIGATION AND CONTROLS ..........47 Login, Logout & Main Menu ....................... 47 4.1.1...
Page 4 4.1.2 Main Menu ............................47 4.1.3 Logout............................... 48 4.1.4 Auto Resume after Power Failure ....................48 4.1.5 Replace Button Battery ........................48 4.1.6 Preview Zoom Function ......................... 49 Manual Record............................. 49 4.2.1 Live Viewing............................. 49 4.2.2 Manual record..........................49 Search & Playback ..........................51 4.3.1 Search Menu ...........................
Page 5 4.9.1Preset Setup ............................67 4.9.2 Activate Preset............................. 68 4.9.3 Patrol setup (Tour Setup)........................68 4.9.4 Activate Patrol (tour) ........................... 68 4.9.5 Pattern Setup ............................68 4.9.6 Activate Pattern Function ........................68 4.9.7 Auto Scan Setup ..........................69 4.9.8 Activate Auto Scan..........................69 4.10 Flip .................................
Page 6 5.5.9 Config File Backup.......................... 90 Information............................91 5.6.1 HDD Information ..........................91 5.6.2 BPS ..............................92 5.6.3 Log ..............................92 5.6.4 Version ............................. 93 5.6.5 Online Users ............................ 93 Shutdown .............................. 94 ABOUT AUXILIARY MENU ................95 Go to Pan/Tilt/Zoom Menu ......................... 95 6.1.1 3D Intelligent Positioning Key .......................
Page 7 7.3.2 System Configuration ........................110 7.3.3 Advanced ............................128 7.3.4 Additional Function ........................134 Search ..............................136 Alarm ..............................140 About ..............................141 Log out ..............................141 Un-install Web Control........................142 PROFESSIONAL SURVEILLANCE SYSTEM ..........143 FAQ......................... 144 APPENDIX A HDD CAPACITY CALCULATION ..........149 APPENDIX B COMPATIBLE USB DRIVE LIST ..........
Page 8 Welcome Thank you for purchasing our DVR! This operating manual is designed to be a reference tool for the installation and operation of your system. Here you can find information about this series DVR features and functions, as well as a detailed menu tree.
Page 9: Important Safeguards And Warnings
Important Safeguards and Warnings 1．Electrical safety All installation and operation here should conform to your local electrical safety codes. We assume no liability or responsibility for all the fires or electrical shock caused by improper handling or installation. 2．Transportation security Heavy stress, violent vibration or water splash are not allowed during transportation, storage and installation.
Page 10: Features And Specifications
1 FEATURES AND SPECIFICATIONS 1.1 Overview This series product is an excellent digital monitor product. It adopts embedded Linux OS to maintain reliable operation. Popular H.264 compression algorithm and G.711 audio compression technology realize high quality, low bit stream. Unique frame by frame play function is suitable for detailed analysis.
Page 11: Specifications
Support various decode protocols to allow the PTZ to control the speed dome. Intelligent operation Mouse operation function In the menu, support copy and paste setup function Slight function differences may be found due to different series. 1.3 Specifications 1.3.1 Standard 1U Series 4-ch 8-ch 16-ch Parameter High-performance industrial embedded micro controller...
Page 12 1-ch PAL/NTSC, BNC (1.0VP- P, 75Ω) composite video signal output. Video monitor Video 1-ch VGA output. Output 1-ch HDMI output. Support TV/VGA/HDMI video output at the same time. Video PAL (625 line, 50f/s), NTSC (525 line, 60f/s) Standard Real-time Mode: PAL 1f/s to 25f/s per channel and NTSC 1f/s to 30f/s Record per channel Speed...
Page 13 Manual recording, motion detection recording, schedule recording and Recording alarm recording Mode Priority: Manual recording> alarm recording>motion detection Record and recording>schedule recording. playback Recording 1 to 120 minutes single record duration (Default setup is 60 minutes) Length Playback Repeat When hard disk is full, system can overwrite previous video file. Record Various search engines such as time, type and channel.
Page 14 16-ch alarm input 4-ch alarm input（You 8-ch alarm input（You （You can set can set normal open or can set normal open or normal close type to normal close type to normal open or Alarm Input normal close select the alarm type. ） select the alarm type.
Page 15: Simple Entry Level Series
Installation Desktop installation Mode 1.3.2 Simple Entry Level Series 4-ch 8-ch 16-ch Parameter High-performance industrial embedded micro controller Main System Processor Embedded LINUX System Multiplex operations: Multiple-channel record, multiple-channel playback Resources and network operation simultaneously User-friendly graphical user interface Interface Input Front panel, USB mouse, remote control Devices...
Page 16 Zone setup: support max 396(22×18) zones. Motion Support various sensitivities. Detection Image 6-level image quality (Adjustable) Quality Privacy Support one privacy mask of user-defined size in full screen. mask Support max 4 zones. Image Channel information, time information and privacy mask zone. Information TV Adjust Adjust TV output zone suitable to anamorphic video.
Page 17 Support USB burner (extension function). Support network download and backup View monitor channel remotely. DVR configuration through client-end and web browser Upgrade via client or browser to realize remote maintenance. Network View alarm information such as external alarm, motion detection and video Function loss via client.
Page 18: Simple Lite Series
Support user /group and its corresponding rights modification. No limit to the user or group amount. Password modification Password Administrator can modify other user’s password. Authenticati Account lock strategy Five times login failure in thirty minutes may result in account lock. Web browser, client-end and update tool.
Page 19 Video PAL (625 line, 50f/s), NTSC (525 line, 60f/s) Video monitor Standard Real-time Mode: PAL 1f/s to 25f/s per channel and NTSC 1f/s to 30f/s per Record channel Speed Video 1/4 windows(Optional) Partition Monitor Support monitor tour functions such as alarm, motion detection, and Touring schedule auto control.
Page 20 Various File Can switch to previous or next file or any file in current play list. Switch Can switch to file on other channel of the same time. (If there is a file) Ways Support file continuous play, when file is end system auto plays the next file in the current channel Multi- There is 1/2/3/4-channel playback.
Page 21 Password modification Password Administrator can modify other user’s password. Authenticati Account lock strategy Five times login failure in thirty minutes may result in account lock. Web browser, client-end and update tool. Upgrade Password login protection to guarantee safety User-friendly interface when login. Provide the following options: Logout Login, Logout and Shutdown /shutdown/ restart.
Page 22: Overview And Controls
DVR for the first time, please refer to this part first. 2.1 Front Panel This series product has two types of front panels. 2.1.1 Standard 1U Series The front panel is shown as in Figure 2-1. Figure 2-1 2.1.2 Simple Entry Level Series and Simple Lite Series The simple entry level and simple lite series is shown as in Figure 2-2.
Page 23 When playback, click it to restore real-time monitor mode. Confirm current operation Enter ENTER Go to default button Go to menu Manually stop/start recording, working with direction keys Record or numeral keys to select the recording channel. Multiple slow play speeds or normal playback. Slow play/8 In text mode, input number 8 (English character T/U/V).
Page 24: Rear Panel
The light light become off when the external alarm stops. 2.2 Rear Panel 2.2.1 Standard 1U Series Standard 1U series product rear panel is shown as below. See Figure 2-3 through Figure 2-5. Figure 2-3 4-channel Figure 2-4 8-channel...
Page 25 Figure 2-6 4-channel Figure 2-7 8-channel Please refer to the following sheet for detailed information. Video input Audio input Video CVBS output Audio output Network port USB port Video VGA output Power input port Alarm input/alarm output/RS485 port Power button Simple entry level series real panel (16-channel) is shown as below.
Page 26: Simple Lite Series
2.3 Connection Sample 2.3.1 Standard 1U series Please refer to F igure 2-10 for standard 1U series product connection sample. X 2 8 1 H 2 8 1 H 2 8 1 H The following figure is based on one 8-channel series.
Page 27: Simple Entry Level Series
Figure 2-10 2.3.2 Simple Entry Level Series Please refer to F igure 2-11 for simple entry level series product connection sample. X 2 8 1 H 2 8 1 H 2 8 1 H The following figure is based on one 4-channel series.
Page 28: Simple Lite Series
Figure 2-11 2.3.3 Simple Lite Series Please refer to F igure 2-12 for simple lite series product connection sample. X 2 8 1 H 2 8 1 H 2 8 1 H The following figure is based on one 4-channel series.
Page 29: Remote Control
Figure 2-12 2.4 Remote Control The remote control interface is shown as in F igure 2-13. X 2 8 2 H 2 8 2 H 2 8 2 H Please note remote control is not our standard accessory and it is not included in the accessory bag.
Page 30 Figure 2-13 Serial Number Name Function Address Click it to input device serial number, so that you can control Multiple-window switch Please refer to the multiple- window switch button in the front panel (MULT) 0-9 number key Input password, channel or switch channel.
Page 31: Mouse Control
button in the front panel. 2.5 Mouse Control Left click System pops up password input dialogue box if you have not logged in. mouse In real-time monitor mode, you can go to the main menu. When you have selected one menu item, left click mouse to view menu content.
Page 32: Virtual Keyboard & Front Panel
Right click In real-time monitor mode, pops up shortcut menu: one-window, four-window, mouse nine-window and sixteen-window, Pan/Tilt/Zoom, color setting, search, record, alarm input, alarm output, main menu. Among which, Pan/Tilt/Zoom and color setting applies for current selected channel. If you are in multiple-window mode, system automatically switches to the corresponding channel.
Page 33: Installation And Connections
3 Installation and Connections Note: All the installation and operations here should conform to your local electric safety rules. 3.1 Check Unpacked DVR When you receive the DVR from the forwarding agent, please check whether there is any visible damage. The protective materials used for the package of the DVR can protect most accidental clashes during transportation.
Page 34: Connecting Power Supply
7. Put the cover in accordance 8. Secure the screws in the with the clip and then place the rear panel and the side panel. upper cover back. Note: You can connect the HDD data cable and the power cable first and then fix the HDD in the device.
Page 35: Connecting Video Output
Figure 3-1 Standard 1U Series Figure 3-2 Simple Entry Level Series Figure 3-3 Simple Lite Series 3.5.2 Connecting Video Output Video output includes a B NC(PAL/NTSC BNC（1.0VP- P， 75Ω）output , a VGA output and one HDMI output.
Page 36 The standard 1U series supports BNC, VGA and HDMI output at the same time. See Figure 3-4 The simple entry level and simple lite series supports BNC and VGA output at the same time . See Figure 3-5 and Figure 3-6.
Page 37: Connecting Audio Input & Output, Bidirectional Audio
Due to high impedance of audio input, please use active sound pick-up. See Figure 3-7 to Figure 3-9. Audio transmission is similar to video transmission. Try to avoid interference, dry joint, loose contact and it shall be away from high tension current. Figure 3-7 Standard 1U Series...
Page 38: Audio Output
Figure 3-8 Simple Entry Level Series Figure 3-9 Simple Lite Series 3.6.2 Audio Output The audio output signal parameter is usually over 200mv 1KΩ (BNC). It can directly connect to low impedance earphone, active sound box or amplifier-drive audio output device. If the sound box and the pick-up cannot be separated spatially, it is easy to arouse squeaking.
Page 39: Alarm Input And Output Connection
Figure 3-10 Standard 1U Series Figure 3-11 Simple Entry Level Series Figure 3-12 Simple Lite Series 3.7 Alarm Input and Output Connection Please note simple lite series product does not support alarm function.
Page 40 Please refer to the following sheet for alarm input and output connection. See Figure 3-13 and Figure 3-14. Figure 3-13 Standard 1U Series Figure 3-14 Simple Entry Level Series There are two alarm input types for you to select: normal open (NO) and normal close (NC).
Page 41: Alarm Input And Output Details
c. For too long signal wires, 120Ω should be parallel connected between A, B lines on the far end to reduce reflection and guarantee the signal quality. d. “485 A, B” of DVR cannot parallel connect with “485 port” of other device. e.
Page 42: Alarm Input Port
Figure 3-16 You can refer to the following sheet for alarm input and output information. Parameter Grounding Alarm Ground line Alarm Input 1, 2, …, 16.. It becomes valid in low voltage. Three NO activation outputs. 1-NO C， 2-NO C， 3-NO C 485 A/B 485 communication port.
Page 43: Alarm Output Port
Figure 3-18 3.7.3 Alarm Output Port Provide external power to external alarm device. To avoid overloading, please read the following relay parameters sheet carefully. RS485 A/B cable is for the A/B cable of the PTZ decoder. Relay Specification JRC-27F Model: Silver Material of the touch...
Page 44 The series DVR also support NKB operation. You can operate the DVR from the keyboard controls instead of using the control pad on the front panel of the unit. To connect a NKB keyboard to the DVR: 1. Assemble the KBD keyboard according to the instructions in its accompanying installation manual. 2.
Page 45: Other Interfaces
There are still other interfaces on the DVR, such as USB ports. Standard 1U Series 3.10.1 You can refer to the Figure 3-22 for more information. Figure 3-22 Stand 1U Series 3.10.2 Simple entry level series Please refer to the Figure 3-23 for more information. Figure 3-23 Simple Entry Level Series...
Page 46 Please refer to Figure 3-24 for more information. Figure 3-24 Simple Lite Series...
Page 47: Overview Of Navigation And Controls
Important Slight difference may be found in the interface. All the interfaces listed below are based on the standard 1U series product. The simple entry level series product does not support RS232 function. The 8-channel simple entry level series product does not support schedule snapshot function and etc.
Page 48: Logout
You can move the cursor to highlight the icon, and then double click mouse to enter the sub- menu. Figure 4-2 4.1.3 Logout There are two ways for you to log out. One is from menu option: In the main menu, click shutdown button, you can see an interface is shown as below. See Figure 4-3.
Page 49: Preview Zoom Function
We recommend replace battery regularly (such as one-year) to guarantee system time accuracy. Note: Before replacement, please save the system setup, otherwise, you may lose the data completely! 4.1.6 Preview Zoom Function Move your mouse to the left top corner of the preview interface; you can see the preview zoom button.
Page 50 4.2.2.2 Basic operation There are three statuses: schedule/manual/stop. Please highlight icon“○” to select corresponding channel. Manual: The highest priority. After manual setup, all selected channels will begin ordinary recording. Schedule: Channel records as you have set in recording setup (Main Menu->Setting- >Schedule) Stop: All channels stop recording.
Page 51: Search & Playback
Figure 4-8 All channel manual record Please highlight “ALL” after “Manual.” See Figure 4-9. When system is in manual recording, all scheduled set up you have set in will be null ((Main menu->Setting->Schedule)). You can see indication light in front panel turns on, system begins manual record now. Figure 4-9 4.2.2.5 Stop all channel recording Please highlight “ALL”...
Page 52: Basic Operation
Select playback mode Playback control bar here: 4-ch or All-channel Set search setup here :( Time/Channel/Type) Figure 4-11 Please refer to the following sheet for more information. Serial Number Function Play Backward Stop Slow play Fast play Previous frame Next frame Volume Previous file Next channel...
Page 53 There are two playback modes: 4-ch and all-channel. In 4-ch playback mode, you can select the 1/2/3/4-ch playback according to your requirement. In all-channel mode, system can playback in full channels. Please note the 4-ch has no all-channel playback mode. 4.3.2.3 Accurate playback Input time (h/m/s) in the time column and then click playback button, system can operate accurate playback.
Page 54: Calendar
All the operations here (such as playback speed, channel, time and progress) have relationship with hardware version. Some series DVRs do not support some functions or playback speeds. 4.3.3 Calendar Click calendar icon in Figure 4-12, system pops up a calendar for your reference. The highlighted date means there are record files in that day.
Page 55: Snapshot
Figure 4-13 4.4.1.1 Quick Setup This function allows you to copy one channel setup to another. After setting in channel 1, you can click paste button and turn to channel 2 and then click copy button. You can finish setting for one channel and then click save button or you can finish all setup and then click save button to memorize all the settings.
Page 56: Image Ftp
4.4.2.2 Activation Snapshot Please follow the steps listed below to enable the activation snapshot function. After you enabled this function, system can snapshot when the corresponding alarm occurred. In Encode interface, click snapshot button to input snapshot mode, size, quality and frequency.
Page 57: Detect
Please input the corresponding information here, if you just upload the image FTP. Figure 4-16 4.5 Detect 4.5.1 Go to Detect Menu In the main menu, from Setting to Detect, you can see motion detect interface. See Figure 4-17. There are three detection types: motion detection, video loss, camera masking. The simple lite series product does not support RS232, alarm and PTZ function.
Page 58 Period: Click set button, you can see an interface is shown as in Figure 4-20 . Here you can set for business day and non-business day. In Figure 4-20 , click set button, you can see an X 3 0 7 H 3 0 7 H 3 0 7 H X interface is shown as in Figure 4-21.
Page 59: Video Loss
Figure 4-19 Figure 4-20 Figure 4-21 4.5.3 Video Loss In Figure 4-17, select video loss from the type list. You can see the interface is shown as in F igure 4-22. This function allows you to be informed when video loss phenomenon occurred. X 3 1 1 H 3 1 1 H 3 1 1 H You can enable alarm output channel and then enable show message function.
Page 60: Camera Masking
Figure 4-22 4.5.4 Camera Masking When someone viciously masks the lens, or the output video is in one-color due to the environments light change, the system can alert you to guarantee video continuity. Camera masking interface is shown as in Figure 4-23. Here you can enable alarm output or show message in the screen.
Page 61: Go To Alarm Setup Interface
Please note simple lite series product does not support the alarm function. Before operation, please make sure you have properly connected alarm devices such as light, buzzer. 4.6.1 Go to alarm setup interface In the main menu, from Setting to Alarm, you can see alarm setup interface. See Figure 4-24. 4.6.2 Alarm setup Alarm interface is shown as below.
Page 62 Figure 4-24 Figure 4-25 Figure 4-26 Figure 4-27...
Page 63: Backup
4.7 Backup DVR support USB device backup and network download. Here we introduce USB backup first. You can refer to Chapter 7 Web Operation for network download backup operation. 4.7.1 Detect Device Click backup button, you can see an interface is shown as in Figure 4-28.Here is for you to view devices information.
Page 64: Ptz Control And Color Setup
Click backup button, system begins burning. At the same time, the backup button becomes stop button. You can view the remaining time and process bar at the left bottom. See Figure 4-30. Figure 4-30 The file name format usually is: SN_CH+channel number+time Y+M+D+H+M+S. In the file name, the YDM format is the same as you set in general interface.
Page 65 Channel: select the current camera channel. Protocol: select corresponding PTZ protocol(such as PELCOD) Address: default address is 1. Baud rate: select corresponding baud rate. Default value is 9600. Data bits: select corresponding data bits. Default value is 8. Stop bits: select corresponding stop bits. Default value is 1. Parity: there are three options: odd/even/none.
Page 66: Intelligent Positioning Key
Figure 4-33 In Figure 4-33, please click direction arrows (See Figure 4-34) to adjust PTZ position. There are total 8 direction arrows. Figure 4-34 4.8.3 3D Intelligent Positioning Key In the middle of the eight direction arrows, there is a 3D intelligent positioning key. See Figure 4-35.
Page 67: 1Preset Setup
Figure 4-36 F igure 4-33, click page switch button, the interface is shown as in Figure 4-37. X 3 2 8 H 3 2 8 H 3 2 8 H Here you can activate the following functions: Preset Tour Pattern Auto scan Auto pan Flip...
Page 68: Activate Preset
Figure 4-38 4.9.2 Activate Preset In Figure 4-37, please input preset number in the No. blank, and click preset button. 4.9.3 Patrol setup (Tour Setup) F igure 4-36, please click patrol button. The interface is shown as in Figure 4-39.Input preset X 3 3 9 H 3 3 9 H 3 3 9 H number and add this preset to a patrol (tour).
Page 69: Auto Scan Setup
In Figure 4-37, input mode value in the No. blank, and click pattern button. 4.9.7 Auto Scan Setup In Figure 4-36, click border button. The interface is shown as in Figure 4-41. Please go to Figure 4-33, use direction arrows to select camera left limit Then please go to Figure 4-41 and click left limit button Repeat the above procedures to set right limit.
Page 70: Understanding Of Menu Operations And Controls
5 Understanding of Menu Operations and Controls 5.1 Menu Tree The standard 1U series DVR and simple entry level series DVR menu tree is shown as below. Backup Information HDD Info Version Online Users Setting General Encode Schedule RS232 (For standard 1U series only)
Page 71: Main Menu
Backup Information HDD Info Version Online Users Setting General Encode Schedule Menu Network Detect Display Default Search Advanced HDD Management Abnormity Manual Record Account Auto Maintain TV Adjust Card Overlay Config File Backup Shutdown 5.2 Main Menu After you logged in, the system main menu is shown as below. See Figure 5-1. There are total six icons: search, Information, setting, backup, advanced and shutdown.
Page 72: Setting
5.3 Setting In main menu, highlight setting icon and double click mouse. System setting interface is shown as below. See Figure 5-2. Figure 5-2 5.3.1 General General setting includes the following items. See Figure 5-3. System time: Here is for you to set system time Date format: There are three types: YYYYY-MM-DD: MM-DD-YYYYY or DD-MM-YYYY.
Page 73: Encode
After completing all the setups please click save button, system goes back to the previous menu. Figure 5-3 Figure 5-4 Figure 5-5 5.3.2 Encode Encode setting includes the following items. See Figure 5-6. Please note some series do not support extra stream. Channel: Select the channel you want.
Page 74: Schedule
If the 1-channel resolution is D1 and the frame rate is or less than 6f/s, then the rest seven channels (the second channel to the eighth channel) resolution shall be D1/CIF/QCIF. Right now in D1 resolution, the max frame rate is 6f/s. Bit rate type: System supports two types: CBR and VBR.
Page 75: Rs232
5.3.4 RS232 Please note Simple entry level series product and simple lite series product does not support RS232 function. RS232 interface is shown as below. There are five items. See Figure 5-8. Function: There are various devices for you to select. Console is for you to use the COM or mini-end software to upgrade or debug the program.
Page 76 UDP port: Default value is 37778. HTTP port: Default value is 80. Max connection: system support maximal 10 users. 0 means there is no connection limit. Preferred DNS: DNS IP address. Alternative DNS: DNS alternative IP address. Transfer mode: Here you can select the priority between fluency/video qualities. LAN download: System can process the downloaded data first if you enable this function.
Page 77 Figure 5-11 5.3.5.3 Multiple Cast Setup Multiple-cast setup interface is shown as in Figure 5-12. Figure 5-12 Here you can set a multiple cast group. Please refer to the following sheet for detailed information. IP multiple cast group address -224.0.0.0-239.255.255.255 -“D”...
Page 78 -Private address space Like the single broadcast address of RFC1918 Can not be used in Internet transmission Used for multiple cast broadcast in limited space. Except the above mentioned addresses of special meaning, you can use other addresses. For example: Multiple cast IP: 235.8.8.36 Multiple cast PORT: 3666.
Page 79 Alaska GMT-9 Pacific Time(P.T) GMT-8 American Mountain Time(M.T) GMT-7 American Central Time(C.T) GMT-6 American Eastern Time(E.T) GMT-5 Atlantic Time GMT-4 Brazil GMT-3 Middle Atlantic Time GMT-2 Figure 5-14 5.3.5.6 DDNS Setup DDNS setup interface is shown as in Figure 5-15. You need a PC of fixed IP in the internet and there is the DDNS software running in this PC.
Page 80 5.3.5.7 FTP You need to download or buy FTP service tool (such as Ser-U FTP SERVER) to establish FTP service. Please install Ser-U FTP SERVER first. From “start” -> “program” -> Serv-U FTP Server -> Serv- U Administator. Now you can set user password and FTP folder. Please note you need to grant write right to FTP upload user.
Page 81: Alarm
Figure 5-18 Please highlight the icon in front of Enable to activate FTP function. Here you can input FTP server address, port and remote directory. When remote directory is null, system automatically create folders according to the IP, time and channel. User name and password is the account information for you to login the FTP.
Page 82: Display
Figure 5-19 5.3.9 Display Display setup interface is shown as below. See Figure 5-20. Transparency: Here is for you to adjust transparency. The value ranges from 128 to 255. Channel name: Here is for you to modify channel name. System max support 25-digit (The value may vary due to different series).
Page 83 Figure 5-20 In Figure 5-20 , click modify button after channel. You can see an interface is shown as in Figure 5-21. Please note all your modification here applies to local end only. You need to refresh web or client-end to get the latest channel name. System max support 25-digital character. Figure 5-21 In tour mode, you can see the following interface.
Page 84: Default
5.3.10 Default Click default icon, system pops up a dialogue box. You can highlight to restore default factory setup. See Figure 5-23. Select all General Encode Schedule RS232 Network Alarm Detect Pan/tilt/zoom Display Channel name Please highlight icon to select the corresponding function. After all the setups please click save button, system goes back to the previous menu.
Page 85: Hdd Management
Figure 5-24 5.5.1 HDD Management Here is for you to view and implement hard disk management. See Figure 5-25. You can see current HDD type, status, capacity and record time. When HDD is working properly, system is shown as O. When HDD error occurred, system is shown as X. You can select HDD mode from the dropdown list such as read-only or you can erase all data in the HDD.
Page 86: Abnormity
Figure 5-26 5.5.2 Abnormity Abnormity interface is shown as in Figure 5-27. Event type: There are several options for you such as disk error, no disk, disconnection, IP conflict and etc. Alarm output: Please select alarm activation output port (multiple choices). Latch: Here you can set corresponding delaying time.
Page 87: Manual Record
Please highlight icon to select the corresponding alarm output. After all the setups please click OK button, system goes back to the previous menu. See Figure 5-28. Figure 5-28 5.5.4 Manual Record Please refer to chapter 4.2.2 manual record. 5.5.5 Account Here is for you to implement account management.
Page 88: Auto Maintain
Figure 5-29 5.5.6 Auto Maintain Here you can set auto-reboot time and auto-delete old files setup. See Figure 5-30. You can select proper setup from dropdown list. After all the setups please click save button, system goes back to the previous menu. Figure 5-30 5.5.7 TV Adjust Here is for you to adjust TV output setup.
Page 89: Card Overlay
5.5.8 Card Overlay The card overlay function is for financial areas. It includes Sniffer, information analysis and title overlay function. The Sniffer mode includes COM and network. 5.5.8.1 COM Type The COM interface is shown as below. See Figure 5-32. Protocol: Please select from the dropdown list.
Page 90: Config File Backup
Without the protocol For the ATM/POS without the protocol, the interface is shown as in Figure 5-34. Source IP refers to host IP address that sends out information (usually it is the device host.) Destination IP refers to other systems that receive information. Usually you do not need to set source port and target port.
Page 91: Information
Figure 5-36 5.6 Information Here is for you to view system information. There are total five items: HDD (hard disk information), BPS (data stream statistics), Log and version, and online user. See Figure 5-37. Figure 5-37 5.6.1 HDD Information Here is to list hard disk type, total space, free space, video start time and status. See Figure 5-38. ○...
Page 92: Bps
When HDD confliction occurs, you can check system time and HDD time are identical or not. If they are not identical, please go to General (Chapter 5.3.1) to adjust system time or go to HDD Management (Chapter 5.5.1) to format HDD and then reboot the DVR. Figure 5-38 Tips: Please click Fn button or left click mouse to view HDD record time and HDD type and time.
Page 93: Version
Figure 5-40 5.6.4 Version Here is for you to view some version information. See Figure 5-41. Channel Alarm in Alarm out System version: Build Date Figure 5-41 5.6.5 Online Users Here is for you manage online users. See Figure 5-42 You can disconnect one user or block one user if you have proper system right.
Page 94: Shutdown
Figure 5-42 5.7 Shutdown Double click shutdown button, system pops up a dialogue box for you to select. See Figure 5-43. Logout menu user: log out menu. You need to input password when you login the next time. Restart application: reboot DVR. Shutdown: system shuts down and turns off power.
Page 95: About Auxiliary Menu
6 About Auxiliary Menu Go to Pan/Tilt/Zoom Menu Please note simple lite series product does not support PTZ function. In the one-window surveillance mode, right click mouse (click “fn” Button in the front panel or click AUX key in the remote control). The interface is shown as below: See F igure 6-1 X 3 9 7 H 3 9 7 H 3 9 7 H Figure 6-1...
Page 96: Preset /Patrol / Pattern /Border Function
In the middle of the eight direction arrows, there is a 3D intelligent positioning key. See F igure X 4 0 1 H 4 0 1 H 4 0 1 H . Please make sure your protocol supports this function and you need to use mouse to control.
Page 97: Preset Setup
Figure 6-6 6.2.1 Preset Setup Note: The following setups are usually operated in the F igure 6-2 F igure 6-5 F igure 6-6 X 4 0 5 H 4 0 5 H 4 0 5 H X 4 0 6 H 4 0 6 H 4 0 6 H X 4 0 7 H 4 0 7 H 4 0 7 H F igure 6-2 , use eight direction arrows to adjust camera to the proper position.
Page 98: Activate Pattern Function
You can memorize all these setups as pattern 1. Figure 6-9 6.2.6 Activate Pattern Function F igure 6-6 input mode value in the No. blank, and click pattern button. X 4 1 9 H 4 1 9 H 4 1 9 H 6.2.7 Border Setup F igure 6-5 , click border button.
Page 99 Figure 6-11...
Page 100: Web Operation
Important Slight difference may be found in the interface. All the interfaces listed below are based on the standard 1U series product. The simple entry level series product does not support RS232 function. The 8-channel simple entry level series product does not support schedule snapshot function and etc.
Page 101 System pops up warning information to ask you whether install webrec.cab control or not. Please click yes button. If you can’t download the ActiveX file, please modify your settings as follows. See F igure 7-2 X 4 2 9 H 4 2 9 H 4 2 9 H Figure 7-2 After installation, the interface is shown as below.
Page 102 After you logged in, you can see the main window. See F igure 7-6 X 4 3 1 H 4 3 1 H 4 3 1 H This main window can be divided into the following sections. Section 1: there are five function buttons: configuration (chapter 7.3), search (chapter 7.4), alarm (chapter 7.5), about (chapter 7.6), log out (chapter 7.7).
Page 103: Real-Time Monitor
7.2.1 Real-time Monitor In section 2, left click the channel name you want to view, you can see the corresponding video in current window. On the top left corner, you can view device IP, channel number, network monitor bit stream. Figure 7-7 On the top right corer, there are six unction buttons.
Page 104: Ptz
Open All You can click it to open all channels. Refresh You can use button to refresh camera list. Start Dialogue You can click this button to enable audio talk. Click 【▼】 to select bidirectional talk mode. There are two options: DEFAULT/G711a. Please note, the audio input port from the device to the client-end is using the first channel audio input port.
Page 105 3D Intelligent Positioning You can click this icon to display or hide the PTZ control platform. Figure 7-11 7.2.2.1 Direction key and 3D positioning key In Figure 7-10, there are eight direction keys. In the middle of the eight direction keys, there is a 3D intelligent positioning key. Click 3D intelligent positioning key, system goes back to the single screen mode.
Page 106 Figure 7-12 7.2.2.4 Auto Scan F igure 7-12 , move the camera to you desired location and then click left limit button. X 4 3 9 H 4 3 9 H 4 3 9 H Then move the camera again and then click right limit button to set a right limit. 7.2.2.5 Pattern F igure 7-12 , you can input pattern value and then click start record button to begin PTZ...
Page 107: Color
Figure 7-13 7.2.3 Color Click color button in section 3, the interface is shown as F igure 7-14 X 4 4 4 H 4 4 4 H 4 4 4 H Here you can select one channel and then adjust its brightness, contrast, hue and saturation. (Current channel border becomes green).
Page 108: Configure
Click picture path button, you can see an interface is shown as in F igure 7-16 X 4 4 7 H 4 4 7 H 4 4 7 H Please click choose button to modify path. Figure 7-16 Click record path button, you can see an interface is shown as in F igure 7-17 X 4 4 8 H 4 4 8 H 4 4 8 H Please click choose button to modify path.
Page 109 Figure 7-19 7.3.1.2 HDD information Here you can view local storage status and network status including, free capacity and total capacity. See F igure 7-20 X 4 5 0 H 4 5 0 H 4 5 0 H Figure 7-20 7.3.1.3 Log Here you can view system log.
Page 110: System Configuration
Figure 7-21 Click backup button, the interface is shown as in F igure 7-22 X 4 5 2 H 4 5 2 H 4 5 2 H Figure 7-22 Please refer to the following sheet for log parameter information. Parameter Function Log types include: system operation, configuration operation, data Type...
Page 111 Figure 7-23 Figure 7-24 Figure 7-25 Please refer to the following sheet for detailed information. Parameter Function Here is for you to modify system time. Please click Save button after System your completed modification Time Sync PC You can click this button to save the system time as your PC current time.
Page 112 Here you can select data format from the dropdown list. Data Format Please select separator such as – or /. Data Separator There are two options: 24-H and 12-H. Time Format Here you can set day night save time begin time and end time. See Figure 7-24 and Figure 7-25.
Page 113 Figure 7-26 Figure 7-27 Please refer to the following sheet for detailed information. Parameter Function Here is for you to select a monitor channel. Channel Here is to display current channel name. You can modify it. Channel Name Compression H.264...
Page 114 Parameter Function Main Stream It includes main stream, motion stream and alarm stream. You can select different encode frame rates form different recorded events. System supports active control frame function (ACF). It allows you to record in different frame rates. For example, you can use high frame rate to record important events, record scheduled event in lower frame rate and it allows you to set different frame rates for motion detection record and alarm record.
Page 115 Parameter Function Time Title You can enable this function so that system overlays time information in video window. OSD transparent value ranges from 0 to 255. 0 means complete transparent. You can use the mouse to drag the time tile position. Channel Title You can enable this function so that system overlays channel information in video window.
Page 116 Figure 7-29 Figure 7-30 Please refer to the following sheet for detailed information. Parameter Function Please select a channel first. Channel Pre-record Please input pre-record value here. System can record the three to five seconds video before activating the record operation into the file. (Depends on data size).
Page 117 Parameter Function Setup F igure 7-29 , click set button, you can go to the corresponding X 4 5 8 H 4 5 8 H 4 5 8 H setup interface. Please set schedule period and then select corresponding record or snapshot type: schedule/snapshot, motion detection/snapshot, and alarm/snapshot.
Page 118 Parameter Function There are three options: 1/2. Stop Bit Baud Bit You can select corresponding baud bit here. There are five options: none/odd/even/space/mark. Parity System default setup is: Function: Console. Data bit: 8 Stop bit: 1 Baud bit: 115200 Parity: None. 7.3.2.5 Network Network interface is shown as in F igure 7-32...
Page 119 Parameter Function Remote Multiple Set MULCAST address and port. Host cast Enable MULCAST function. group PPPOE Input the PPPoE user name and password you get from the IPS (internet service provider) and enable PPPoE function. Please save current setup and then reboot the device to get the setup activated.
Page 120 The DDNS interface is shown as in F igure 7-34 X 4 6 4 H 4 6 4 H 4 6 4 H Please make sure your DVR support this function. Figure 7-34 Please refer to the following sheet for detailed information. Parameter Function Server Type...
Page 121 Figure 7-35 Please refer to the following sheet for detailed information. Parameter Function Please select network storage protocol and then enable NAS enable NAS function. Server IP Input remote storage server IP address. Input Remote storage server port number. Port Log in user account.
Page 122 transmission only and its port shall be 123.The update interval ranges from 1 to 65535. Default value is 10 minutes. Figure 7-36 You can refer to the following sheet for time zone information. City /Region Name Time Zone London GMT+0 Berlin GMT+1 Cairo...
Page 123 Figure 7-37 7.3.2.6 Alarm The simple lite series product does not support alarm function. Alarm setup interface is shown as in F igure 7-38 X 4 6 7 H 4 6 7 H 4 6 7 H Please make sure you have connected the corresponding alarm output device such as the light, buzzer and etc.
Page 124 Figure 7-39 Please refer to the following sheet for detailed information. Parameter Function Event It includes local alarm/network alarm. Type Local alarm: Device detects alarm from input port. Network: Device detects alarm from network. Alarm in Select corresponding alarm channel. Enable You need to draw a circle here so that system can detect the alarm signal.
Page 125 Parameter Function Capture You need to input capture channel number so that system can backup snapshot file when alarm occurs. Copy It is a shortcut menu button. You can copy current channel setup to one or more (all) channels. Save You can click save button after you complete setup for one channel, or you can complete the whole setups and then click save button.
Page 126 Please refer to the following sheet for detailed information. Parameter Function Event There are three types: Motion detection/video loss/Camera Masking. Type Channel Select channel name from the dropdown list. Enable You need to draw a circle to enable motion detection function. There are six levels.
Page 127 Parameter Function Here you can set PTZ movement when alarm occurs. Such as go to Activation preset x when there is an alarm. Capture You need to input capture channel number so that system can backup motion detection snapshot file. Copy It is a shortcut menu button.
Page 128: Advanced
Parameter Function Data Bit Default setup is 8. Please set according to the speed dome dial switch setup. Default setup is 1. Please set according to the speed dome dial switch Stop bit setup. Parity Default setup is none. Please set according to the speed dome dial switch setup.
Page 129 Please note, if you want to use local storage function, your storage device need to support current function. Please select the storage device first and then you can see the items on your right become valid. You can check the corresponding item here. See F igure 7-44 X 4 7 2 H 4 7 2 H 4 7 2 H Figure 7-44...
Page 130 Figure 7-45 Important The alarm output port should not be connected to high power load directly (It shall be less than 1A) to avoid high current which may result in relay damage. Please use the co contactor to realize the connection between the alarm output port and the load. Please refer to the following sheet for detailed information.
Page 131 Figure 7-46 Please refer to the following sheet for detailed information. Parameter Function System enables auto record function as you set in record schedule Auto setup. Enable corresponding channel to record no matter what period Manual applied in the record setup. Stop current channel record no matter what period applied in the Stop record setup.
Page 132 Figure 7-47 7.3.3.5 Auto Maintenance Here you can select auto reboot and auto delete old files interval from the dropdown list. See F igure 7-48 X 4 7 6 H 4 7 6 H 4 7 6 H Figure 7-48...
Page 133 7.3.3.6 Snapshot Snapshot interface is shown as in F igure 7-49 X 4 7 7 H 4 7 7 H 4 7 7 H Figure 7-49 Please refer to the following sheet for detailed information. Parameter Function Channel It is the monitor channel. There are two modes: Timing and activation.
Page 134: Additional Function
Figure 7-50 Please refer to the following sheet for detailed information. Parameter Function Event The abnormal events include: no disk, no space, disk error, net error. Type You need to draw a circle to enable this function. Normal The corresponding alarm activation output channel when alarm occurs, There are three channels.
Page 135 Source IP refers to host IP address that sends out information (usually it is the device host connected to the DVR.) Destination IP refers to other systems that receive information. There are total four groups IP. The record channel applies to one group (optional) only. Six frame ID groups verification can guarantee information validity and legal.
Page 136: Search
Please refer to the following sheet for detailed information. Parameter Function Enable Enable auto register function. Device management server number. Device management server IP address. Port Server port number. Device ID Device ID in the device management server. 7.3.4.3 DNS Here you can set server or local operator DNS address.
Page 137 Figure 7-54 Select the file(s) you want to download and then click download button, system pops up a dialogue box shown as in Figure 7-55, and then you can specify file name and path to download the file(s) to your local pc. Figure 7-55 Now you can see system begins download and the download button becomes stop button.
Page 138 Figure 7-56 When download completed, you can see a dialogue box shown as in Figure 7-57. Please click OK to exit. Figure 7-57 Please refer to the following sheet for detailed information. Type Parameter Function Type Record Search general record, alarm record and motion detection record.
Page 139 Type Parameter Function Download Download by file: Select the file(s) and then click type download button. Download by time: Download the recorded file(s) within your specified period. Download Select the file you need (multiple choices) and then click download button, you can see system pops up a dialogue box.
Page 140: Alarm
Playback device IP address and channel number. Playback control bar Figure 7-58 7.5 Alarm Click alarm function, you can see an interface is shown as in Figure 7-59. Here you can set device alarm type and alarm sound setup. Figure 7-59...
Page 141: About
Please refer to the following sheet for detailed information. Please make sure current device can upload the alarm. Type Parameter Function Alarm Video loss System alarms when video loss occurs. Type Motion detection System alarms when motion detection alarm occurs, Disk full System alarms when disk is full.
Page 142: Un-Install Web Control
Figure 7-61 7.8 Un-install Web Control You can use web un-install tool “uninstall web.bat” to un-install web control. Please note, before you un-installation, please close all web pages, otherwise the un- installation might result in error.
Page 143: Professional Surveillance System
8 Professional Surveillance System Besides Web, you can use our Professional Surveillance Software (PSS) to login the device. For detailed information, please refer to PSS user’s manual.
Page 144: Faq
9 FAQ 1. DVR can not boot up properly. There are following possibilities: Input power is not correct. Power connection is not correct. Power switch button is damaged. Program upgrade is wrong. HDD malfunction or something wrong with HDD ribbon. Seagate DB35.1，DB35.2，SV35 or Maxtor 17-g has compatibility problem.
Page 145 DVR color or brightness setup is not correct. 6. Can not search local records. There are following possibilities: HDD ribbon is damaged. HDD is broken. Upgraded program is not compatible. The recorded file has been overwritten. Record function has been disabled. 7.
Page 146 PTZ decoder and DVR address is not compatible. When there are several decoders, please add 120 Ohm between the PTZ decoder A/B cables furthest end to delete the reverberation or impedance matching. Otherwise the PTZ control is not stable. The distance is too far. 12.
Page 147 System uses too much CPU resources. Please stop record first and then begin backup. Data amount exceeds backup device capacity. It may result in burner error. Backup device is not compatible. Backup device is damaged. 17. Keyboard can not control DVR. There are following possibilities: DVR serial port setup is not correct Address is not correct...
Page 148 There is no DivX503Bundle.exe control when you play the file transformed to AVI via media player. No DivX503Bundle.exe or ffdshow-2004 1012 .exe in Windows XP OS. 23. Forget local menu operation password or network password Please contact your local service engineer or our sales person for help. We can guide you to solve this problem.
Page 149: Appendix A Hdd Capacity Calculation
Appendix A HDD Capacity Calculation Calculate total capacity needed by each DVR according to video recording (video recording type and video file storage time). Step 1: According to Formula (1) to calculate storage capacity that is the capacity of each channel needed for each hour, unit Mbyte.
Page 150: Appendix B Compatible Usb Drive List
Appendix B Compatible USB Drive List NOTE: Please upgrade the DVR firmware to latest version to ensure the accuracy of the table below. If you use the USB drive, please confirm the format FAT or FAT32. Manufacturer Model Capacity Sandisk Cruzer Micro 512M Sandisk...
Page 151: Appendix C Compatible Cd/Dvd Burner List
Appendix C Compatible CD/DVD Burner List NOTE: Please upgrade the DVR firmware to latest version to ensure the accuracy of the table below. And you can use the USB cable with the model recommended to set USB burner. Manufacturer Model Port Type Type Sony...
Page 152: Appendix D Compatible Sata Hdd List
Appendix D Compatible SATA HDD List NOTE: Please upgrade the DVR firmware to latest version to ensure the accuracy of the table below. And SATA HDD should be used for the DVR with SATA port. Port Manufacturer Series Model Capacity Mode Seagate Barracuda.10...
Page 153 Western Digital Cariar SE16 WD5000KS2 500G SATA Western Digital Cariar SE16 WD4000KD2 400G SATA Western Digital Cariar SE16 WD3200KS2 320G SATA Western Digital Cariar SE16 WD2500KS2 250G SATA Western Digital RE series WD5000ABYS 500G SATA Western Digital Caviar Green series WD20EADS SATA Samsung...
Page 154: Appendix E Compatible Displayer List
Appendix E Compatible Displayer List Please refer to the following sheet form compatible displayer list. Brand Model Dimension (Unit: inch) BENQ（LCD） ET-0007-TA 19-inch (wide screen) DELL（LCD） E178FPc 17-inch BENQ（LCD） Q7T4 17-inch BENQ（LCD） Q7T3 17-inch LENOVO（LCD） LXB-L17C 17-inch SANGSUNG（LCD） 225BW 22-inch (wide screen) LENOVO(CRT) LXB-FD17069HB 17-inch...
Page 155: Appendix Fearthing
Appendix F Earthing 1. What is the surge? Surge is a short current or voltage change during a very short time. In the circuit, it lasts for microsecond. In a 220V circuit, the 5KV or 10KV voltage change during a very short time (about microseconds) can be called a surge.
Page 156 work. The signal lightning arrester has many specifications, and widely used in many devices such as telephone, network, analog communication, digital communication, cable TV and satellite antenna. For all the input port, especially those from the outdoor, you need to install the signal lightning arrester. Antenna feed cable lightning arrester: It is suitable for antenna system of the transmitter or the device system to receive the wireless signal.
Page 157 Mixed ground: The mix ground consists of the feature of the one-point ground and multiple-point ground. For example, the power in the system needs to use the one-point ground mode while the radio frequency signal requires the multiple-point ground. So, you can use the following figure to earth.
Page 158 The monitor system usually can adopt the one-point ground. Please connect the ground end of 3-pin socket in the monitor system to the ground port of the system (protection ground cable) 4. The shortcut way to check the electric system using the digital multimeter For 220V AC socket, from the top to the bottom, E (ground cable), N (neutral cable), L(live cable).
Page 159 For L (live cable) Turn the digital multimeter to 750V AC, use your one hand to hold the metal end, and then the other hand insert the pen to the L port of the socket. See the following figure. If the multimeter shows 120, then you can see current live cable connection is standard.

IC Realtime 1U Series User Manual

1 Features and Specifications

2 Overview and Controls

3 Installation and Connections

4 Overview of Navigation and Controls

5 Understanding of Menu Operations and Controls

6 About Auxiliary Menu

7 Web Operation

8 Professional Surveillance System

9 Faq

Appendix A Hdd Capacity Calculation

Appendix B Compatible Usb Drive List

Appendix C Compatible CD/DVD Burner List

Appendix D Compatible Sata Hdd List

Appendix E Compatible Displayer List

Appendix Fearthing

Quick Links

Need help?

Questions and answers

Related Manuals for IC Realtime 1U Series

Summary of Contents for IC Realtime 1U Series

Table of Contents