IC Realtime 1U Series User Manual page 118

Parameter
Stop Bit
Baud Bit
Parity
System default setup is:
Function: Console.
Data bit: 8
Stop bit: 1
Baud bit: 115200
Parity: None.
7.3.2.5 Network
Network interface is shown as in
Please refer to the following sheet for detailed information.
Parameter
Ethernet
DHCP
TCP Port
HTTP Port
UDP Port
Max Connection
Function
There are three options: 1/2.
You can select corresponding baud bit here.
There are five options: none/odd/even/space/mark.
F igure 7-32 .
X 4 6 2 H 4 6 2 H 4 6 2 H X
Figure 7-32
Function
Please select the network card first.
Dynamically get IP address. You can get the device IP from
the DHCP server if you enabled this function.
Default value is 37777.
Default value is 80.
Default value is 37778.
Network user max amount. The value ranges from 0 to 10.
O means there is no user can access current device.
118