1. Manuals
  2. Brands
  3. IC Realtime Manuals
  4. DVR
  5. NVR8256DR
  6. User manual

IC Realtime NVR8256DR User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
NVR Series User's Manual
Version 3.0.1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the NVR8256DR and is the answer not in the manual?

Questions and answers

Related Manuals for IC Realtime NVR8256DR

Summary of Contents for IC Realtime NVR8256DR

  • Page 1 NVR Series User’s Manual Version 3.0.1...

  • Page 2: Table Of Contents

    Table of Contents FEATURES AND SPECIFICATIONS ..............1 Overview ............................1 Features ............................1 Specifications ........................... 2 OVERVIEW AND CONTROLS ................5 Front Panel ............................5 Rear Panel ............................6 Alarm Input and Output Connection ....................7 2.3.1 Alarm Input and Output Details ....................8 2.3.2 Alarm Input Port ...........................
  • Page 3 3.4.4 Version ............................26 3.4.5 Online Users ..........................26 3.4.6 Remote Device Information ...................... 27 3.4.7 System Status ..........................28 Setting ............................. 29 3.5.1 General ............................29 3.5.2 Encode ............................32 3.5.3 Schedule ............................ 34 3.5.4 Network ............................35 3.5.5 Alarm ............................
  • Page 4 5.1.2 Log in ............................75 LAN Mode ............................76 Real-time Monitor ........................... 78 PTZ ..............................79 Image/Alarm out ..........................80 5.5.1 Image............................80 5.5.2 Alarm output ..........................81 WAN Login ............................. 81 Setup ............................... 83 5.7.1 Camera ............................83 5.7.2 Network ............................
  • Page 5 Welcome Thank you for purchasing our NVR! This user’s manual is designed to be a reference tool for the installation and operation of your system. Here you can find information about this series NVR features and functions, as well as a detailed menu tree.

  • Page 6: Important Safeguards And Warnings

    Important Safeguards and Warnings 1．Electrical safety All installation and operation here should conform to your local electrical safety codes. The product must be grounded to reduce the risk of electric shock. We assume no liability or responsibility for all the fires or electric shock caused by improper handling or installation.

  • Page 7: Features And Specifications

    1 FEATURES AND SPECIFICATIONS 1.1 Overview This series product is designed for the management, storage and applications of high definition video data. It adopts the LINUX OS and professional customized hardware platform. It consists of several HDDs management systems, front-end high definition device management system, high definition analysis system, and large-capacity video storage system.

  • Page 8: Specifications

     Support to browse video and audio of the remote IPC and NVS. 1.3 Specifications Specifications NVR8256DR Main Processor Industrial X86 multiple-core processor Operation System Embedded LINUX system Power Support hot swap Redundant dual ball bearing fan MTBF>100 thousand hours Support online replacement.
  • Page 9 Manual recording, motion detection recording, schedule recording and alarm recording. Record Mode Priority: Manual recording>card number recording-> alarm recording>motion detection recording>schedule recording. Record Repeat When hard disk is full, system can overwrite previous video Mode file. Record Search Various search engines such as time, type and channel. Record and Various fast play, slow play speeds, manual frame by frame Playback Mode...
  • Page 10 Password modification Administrator can modify other user’s password. Password Account lock strategy Authentication Five times login failure in thirty minutes may result in account lock. Client-end/update tool. Upgrade USB device Password login protection to guarantee safety User-friendly interface when login. Provide the following Login, Logout and Shutdown options: Logout /shutdown/ restart.

  • Page 11: Overview And Controls

    2 Overview and Controls This section provides information about the rear panel. When you install this series NVR for the first time, please refer to this part first. 2.1 Front Panel The front panel is shown as in Figure 2-1. Figure 2-1 Icon Name...

  • Page 12: Rear Panel

    After you remove the front panel, you can see there are 24 HDDs. From the left to the right and from the top to the bottom, it ranges from 1~4, 5~8, 9~12, 13~16, 17～20, 21～24. See Figure 2-2. You can see there are two indication lights on the HDD bracket. ...

  • Page 13: Alarm Input And Output Connection

    Figure 2-4 Please refer to the following sheet for detailed information. Name Name Alarm input/alarm output HDMI port（Reserved port. Right now system does not support HD decode card.） Power port HDMI port eSATA port USB port SAS port Video VGA output Network port RS485 port Audio input port...

  • Page 14: Alarm Input And Output Details

    2. Alarm output The alarm output port should not be connected to high power load directly (It shall be less than 1A) to avoid high current which may result in relay damage. Please use the co contactor to realize the connection between the alarm output port and the load. 3.

  • Page 15: Alarm Output Port

    Figure 2-6 2.3.3 Alarm Output Port  Provide power to peripheral alarm device.  To avoid overloading, please read the following relay parameters sheet carefully.  RS485 A/B cable is for the A/B cable of the PTZ decoder. Relay Specification JRC-27F Model: Silver...

  • Page 16: Overview Of Navigation And Controls

    3 Overview of Navigation and Controls Connect the device to the monitor and then connect a mouse and power cable. Click the power button at the front panel and then boot up the device to view the video output. You can use the mouse to implement some GUI operation.
  • Page 17 Preview control bar When you move your mouse on the top middle pane of the preview window, you can see the following preview control bar. See Figure 3-3. Figure 3-3 Please refer to the following sheet for detailed information. Main stream and extra stream Real-time monitor switch IPC bidirectional talk...
  • Page 18  During the preview playback process, you can not see the channel title and record status of current channel. It will display the channel title and the record status once you exit the preview playback.  During the preview playback, you can not switch the displayed channel or change current window-display mode.
  • Page 19 Speed is to control PTZ movement speed. The value ranges from 1 to 8.The speed 8 is faster than speed 1. You can use the remote control to click the small keyboard to set. You can click of the zoom, focus and iris to zoom in/out, definition and brightness. The PTZ rotation supports 8 directions.
  • Page 20 Figure 3-6, click page switch button, the interface is shown as in Figure 3-9. X328H328H328H Here you can activate the following functions:  Preset  Tour  Pattern  Auto scan  Auto pan  Flip  Reset  Page switch Figure 3-9 Note: ...
  • Page 21 In Figure 3-8, click patrol button. The interface is shown as in Figure 3-11. Input preset number and add this preset to a patrol (tour). For each patrol (tour), you can input max 80 presets. Figure 3-11 Activate Patrol (tour) Figure 3-8, input patrol (tour) number in the No.
  • Page 22 Activate Auto Scan In Figure 3-9, click “Auto Scan” button, the system begins auto scan. Correspondingly, the auto scan button becomes Stop button. Click stop button to terminate scan operation. Flip In Figure 3-9, click page switch button, you can see an interface is shown as below. See Figure 3-14.

  • Page 23: Main Menu

    You can use the channel list and the device list to manage the connected remote device. The channel list is on the left. Here you can view all connected channel information. The green color in front of the camera name means current channel is recording now. The grey color means current channel is not recording.

  • Page 24: Search & Playback

    Figure 3-17 3.3 Search & Playback Click search button in the main menu, or you can right click mouse and then select the Search item. Search interface is shown as below. See Figure 3-18. Figure 3-18...
  • Page 25 Please refer to the following sheet for more information. Name Function Here is to display the searched picture or file. Display Support 1/4/9/16-window playback. window Here you can select to search extra stream, main stream or picture. Search Select play from read-write disk or play from thee peripheral devices. type The blue highlighted date means there is picture or file.

  • Page 26: Mark Playback

    Smart search The volume of the playback Snapshot Right now, system does not support this function. It is to display the record type and its period in current search criteria. In 4-window playback mode, there are corresponding four time bars. In other playback mode, there is only one time bar.
  • Page 27 When you are playback record, you can mark the record when there is important information. After playback, you can use time or the mark key words to search corresponding record and then play. It is very easy for you to get the important video information. ...

  • Page 28: Information

    Double click one mark information item, you can see system pops up a dialogue box for you to change mark information. You can only change mark name here.  Delete Here you can check the mark information item you want to delete and then click Delete button, you can remove one mark item.
  • Page 29 Figure 3-22 In Figure 3-22, click view record d time button, HDD record time information interface is shown as in Figure 3-23. Figure 3-23 Parameter Function SATA 1-16： 1-16 here means current series product max supports 16 HDD Port HDDs. RAID：1-6 here means current series product max supports 6 SATA HDDs.

  • Page 30: Bps

    You can view the HDD amount the device connected to; ﹡ means the second HDD is current working HDD. Physical port It is to display device connected physical port. Type The corresponding HDD property. Raid name It is to display RAID HDD name. Total space The HDD total capacity.
  • Page 31 Here is for you to view system log file. System lists the following information. See Figure 3-25.  Start time/end time: Pleased select start time and end time, then click search button. You can view the log files in a list. System max displays 100 logs in one page. It can max save 1024 log files.

  • Page 32: Version

    3.4.4 Version Here is for you to view some version information. See Figure 3-27. Please note the following interface is based on the 128-channel series product and it is for reference only.  Channel  Alarm in  Alarm out ...

  • Page 33: Remote Device Information

    3.4.6 Remote Device Information Here you can view the channel status of the remote device, connection log and network balance information and etc. Channel status: Here you can view the IPC status of the corresponding channel such as motion detect, video loss, camera masking, alarm and etc. See Figure 3-29. ：Network camera is normal.

  • Page 34: System Status

    Network Balance: Here you can view network data transmission speed, receive speed. See Figure 3-31. Figure 3-31 3.4.7 System Status It is to view host information, network usage, fan speed, CPU usage, power information, RAID information and HDD information. See Figure 3-32. Figure 3-32 Click RAID information, you can view RAID name, level, HDD information and etc.

  • Page 35: Setting

    Figure 3-33 3.5 Setting In main menu, highlight setting icon and double click mouse. System setting interface is shown as below. See Figure 3-34. Figure 3-34 Important Please note you need to have the proper right to implement the following operation. 3.5.1 General General setting includes the following items.
  • Page 36  System time: Here is for you to set system time  Date format: There are three types: YYYYY-MM-DD: MM-DD-YYYYY or DD-MM-YYYY.  Date separator: There are three denotations to separate date: dot, beeline and solidus.  DST: Here you can set DST time and date. Please enable DST function and then click set button.
  • Page 37 Figure 3-35 Figure 3-36 Figure 3-37 Figure 3-38...

  • Page 38: Encode

    3.5.2 Encode Encode setting includes the following items. See Figure 3-39. Please note some series do not support extra stream.  Channel: Select the channel you want.  Type: Please select from the dropdown list. There are three options: regular/motion detect/alarm.
  • Page 39 Figure 3-39 Figure 3-40 Figure 3-41...

  • Page 40: Schedule

    Figure 3-42 Figure 3-43 3.5.3 Schedule In the main menu, from setting to schedule, you can go to schedule menu. See Figure 3-44.  Channel: Please select the channel number first. You can select “all” if you want to set for the whole channels.

  • Page 41: Network

    Figure 3-44 Figure 3-45 3.5.3.1 Quick Setup Copy function allows you to copy one channel setup to another. After setting in channel 1, click Copy button, you can see current channel name is grey such as channel 1. Now you can select the channel you wan to paste such as channel 5/6/7.
  • Page 42  Load balance: In this mode, device uses bond0 to communicate with the ext ernal device. All cards are working now and bearing the network load. Their network load are general the same. The system is shown as offline once these cards are all offline. For IPv6, the IP address and the default gateway are left in blank.
  • Page 43 Network setting interface is shown as in Figure 3-47. Please draw a circle to enable corresponding function and then double click current item to go to setup interface. Figure 3-47 3.5.4.2 IP Filter IP filter interface is shown as in Figure 3-48. You can add IP in the following list. System supports IPv4 and IPv6 both.
  • Page 44 London GMT+0 Berlin GMT+1 Cairo GMT+2 Moscow GMT+3 New Deli GMT+5 Bangkok GMT+7 Beijing (Hong Kong) GMT+8 Tokyo GMT+9 Sydney GMT+10 Hawaii GMT-10 Alaska GMT-9 Pacific Time(P.T) GMT-8 American Mountain Time(M.T) GMT-7 American Central Time(C.T) GMT-6 American Eastern Time(E.T) GMT-5 Atlantic Time GMT-4 Brazil...
  • Page 45  Reserved local multiple cast group address -224.0.0.0-224.0.0.255 -TTL=1 When sending out telegraph -For example 224.0.0.1 All systems in the sub-net 224.0.0.2 All routers in the sub-net 224.0.0.4 DVMRP router 224.0.0.5 OSPF router 224.0.0.13 PIMv2 router  Administrative scoped addressees -239.0.0.0-239.255.255.255 -Private address space ...
  • Page 46 In network DDNS, please select DDNS type and highlight enable item. And then please input your PPPoE name you get from you IPS and server IP (PC with DDNS). Click save button and then reboot system. Click save button, system prompts for rebooting to get all setup activated. After rebooting, open IE and input the domain name.
  • Page 47 Except default domain name registration, you can also use customized domain name (You can input your self-defined domain name.) After successful registration, you can use domain name to login installed of the device IP.  User name: It is optional. You can input your commonly used email address. Important ...
  • Page 48 Figure 3-53 Figure 3-54 3.5.4.8 UPNP The UPNP protocol is to establish a mapping relationship between the LAN and the WAN. Please input the router IP address in the LAN in Figure 3-46. Double click the UPNP item in Figure 3-47, you can see the following interface. See Figure 3-53. ...
  • Page 49  Internal port：Port that has been mapped in the router.  External port：Port that has been mapped locally.  Default: UPNP default port setting is the HTTP, TCP and UDP of the NVR.  Add to the list: Click it to add the mapping relationship. ...
  • Page 50  Sender: Please input sender email box here.  Title: Please input email subject here. System support English character and Arabic number. Max 32-digit.  Receiver: Please input receiver email address here. System max supports 3 email boxes.  SSL enable: System supports SSL encryption box. ...
  • Page 51 You need to download or buy FTP service tool (such as Ser-U FTP SERVER) to establish FTP service. Please install Ser-U FTP SERVER first. From “start” -> “program” -> Serv-U FTP Server -> Serv- U Administator. Now you can set user password and FTP folder. Please note you need to grant write right to FTP upload user.
  • Page 52  File length is upload file length. When setup is larger than the actual file length, system will upload the whole file. When setup here is smaller than the actual file length, system only uploads the set length and auto ignore the left section. When interval value is 0, system uploads all corresponding files.
  • Page 53 Figure 3-63 3.5.4.12 SNMP SNMP is an abbreviation of Simple Network Management Protocol. It provides the basic network management frame of the network management system. The SNMP widely used in many environments. It is used in many network device, software and system. You can set in the following interface.
  • Page 54  In Figure 3-64, check the box to enable the SNMP function. Input the IP address of the PC than is running the software in the Trap address. You can use default setup for the rest items.  Compile the above mentioned two MIB file via the software MIB Builder. ...

  • Page 55: Alarm

    Cluster function: When the master device is malfunction the slave device can replace the master device setup and virtual IP to monitor and record. There is no risk of record loss and can guarantee proper real-time monitor function. After the master device resumed proper work, the slave device continue working until you fix manually via the WEB.
  • Page 56  PTZ activation: When an alarm occurred, system can activate the PTZ operation. The PTZ activation lasts an anti-dither period.  In the Pan/Tilt/Zoom interface (Main menu->Setting-> Pan/Tilt/Zoom), please set video channel, speed dome protocol and etc.  Select the channel of current speed dome as current monitor video and the right click mouse to select Pan/Tilt/Zoom item.
  • Page 57 system begins the alarm record instead of the MD record if the local alarm and MD event occurred at the same time.  Tour: Here you can enable tour function when alarm occurs. System supports 1/8-window tour. Please go to chapter 3.5.7 Display for tour interval setup. Please note the tour setup here has higher priority than the tour setup you set in the Display interface.

  • Page 58: Detect

    Figure 3-69 Figure 3-70 3.5.6 Detect Go to Detect Menu In the main menu, from Setting to Detect, you can see motion detect interface. See Figure 3-71.There is three detection types: motion detection, video loss, camera masking.  The video loss has no detection region and sensitivity setup and camera masking has no detection region setup.
  • Page 59 mode, you can click the direction buttons to move the green rectangle to set the motion detection zone. After you completed the setup, right click mouse to exit current setup. Do remember click save button to save current setup. If you click ESC button to exit the region setup interface system will not save your zone setup.
  • Page 60 Figure 3-71 Figure 3-72 Figure 3-73...
  • Page 61 Figure 3-74 Figure 3-75 Video Loss In Figure 3-71, select video loss from the type list. You can see the interface is shown as in Figure 3-76.This function allows you to be informed when video loss phenomenon occurred. You can enable alarm output channel and then enable show message function. Tips: You can enable preset/tour/pattern activation operation when video loss occurs.

  • Page 62: Display

    Camera Masking When someone viciously masks the lens, or the output video is in one-color due to the environments light change, the system can alert you to guarantee video continuity. Camera masking interface is shown as in Figure 3-77. You can enable alarm output channel and then enable show message function.
  • Page 63 process, you can use mouse or click Shift to turn on window switch function. Stands for opening switch function, stands for closing switch function.  Monitor tour type: System support 1-window tour.  Alarm tour type: System support 1-window tour. ...

  • Page 64: Default

    In tour mode, you can see the following interface. On the right corner, right click mouse, you can control the tour. There are two icons: stands for enabling window switch and stands for disabling window function. See Figure 3-80. Figure 3-80 3.5.8 Default Click default icon, system pops up a dialogue box.

  • Page 65: Remote Device

    System menu color, language, time display mode, video format, IP address, user account will not maintain previous setup after default operation! 3.6 Remote Device In the main menu, click the Remote Device icon to go to the corresponding interface. The remote device interface is shown as in Figure 3-82. ...

  • Page 66: Advanced

    Click the Manual Add button; you can go to the following interface. See Figure 3-84. This series product max supports 32-channel standard definition video/high definition non-real- time video and the transmission rate is 1mbps per channel. It can also max supports 4-channel high definition video and the transmission rate is 8mbps.

  • Page 67: Hdd Manager

    3.7.1 HDD Manager Here is for you to view and implement hard disk management. See Figure 3-86. You can see current HDD type, status, capacity and record time. When HDD is working properly, system is shown as O. When HDD error occurred, system is shown as X. ...

  • Page 68: Abnormality

    Figure 3-87 Important HDD group here refers to the HDD port number it does not change in case you replace the HDD. HDD Channel Setting Click the button named with “Channel Setting” in Figure 3-86, system will pop up an interface shown as in Figure 3-88.

  • Page 69: Alarm Output

    Abnormality interface is shown as in Figure 3-89.  Event type: There are several options for you such as disk error, no disk, disconnection, IP conflict, MAC conflict, redundant power and etc.  Alarm output: Please select alarm activation output port (multiple choices). ...

  • Page 70: Manual Record

    3.7.4 Manual Record Note: You need to have proper rights to implement the following operations. Please make sure the HDD has been properly installed. 3.7.4.1 Manual record menu Right click mouse on the preview mode or in the main menu, from Advanced->Manual Record, you can see manual record menu is shown as in Figure 3-91.
  • Page 71 3.7.4.4 Enable all channel recording Highlight ○ below All, you can enable all channel recording.  All channel schedule record Please highlight “ALL” after “Schedule”. See Figure 3-93. When system is in schedule recording, all channels will record as you have previously set (Main menu->Setting->Schedule).

  • Page 72: Account

    Figure 3-95 3.7.5 Account Here is for you to implement account management. See Figure 3-96. Here you can:  Add new user  Modify user  Add group  Modify group  Modify password. For account management please note:  For the user account name and the user group, the string max length is 6-byte.
  • Page 73 Figure 3-96 3.7.5.1 Modify Password Click password button, the interface is shown as in Figure 3-97. Here you can modify account password. Please select the account from the dropdown list, input the old password and then input the new password twice. Click the Save button to confirm current modification. For the users of user account right, it can modify password of other users.

  • Page 74: Auto Maintain

    Figure 3-98 3.7.5.3 Add/Modify User Click add user button, the interface is shown as in Figure 3-99. Please input the user name, password, select the group it belongs to from the dropdown list. Then you can check the corresponding rights for current user. For convenient user management, usually we recommend the general user right is lower than the admin account.

  • Page 75: Config Backup

    Figure 3-100 3.7.7 Config Backup The configuration file backup interface is shown as below. See Figure 3-101. This function allows you to copy current system configuration to other devices or import configuration from USB devices. . Figure 3-101 3.7.8 RAID Manager This interface is for you to manage RAID disk, display RAID name, type, free space, total space, status and etc.

  • Page 76: Backup

    Figure 3-102 Click Hotspare manager button in Figure 3-102, you can go to the following interface to add or delete hotspare disk. See Figure 3-103. Figure 3-103 3.8 Backup In this interface, you can backup record file to the USB device. Connect USB burner, USB device, or portable HDD and etc to the device.
  • Page 77 Figure 3-104 Select backup device and click Backup button to go to the backup interface. Click Browse button, you can view folders of connected device. Set channel, file start time and end time. Click add button, system begins search. All matched files are listed below.

  • Page 78: Shutdown

     If there is any error during the backup process such as there is no backup device, you can see the corresponding dialogue box.  The file name format usually is: Channel number+Record type+Time. In the file name, the YDM format is Y+M+D+H+M+S. File extension name is .dav. 3.9 Shutdown Double click shutdown button, system pops up a dialogue box for you to select.
  • Page 79 Figure 3-107...

  • Page 80: System Upgrade

    4 System Upgrade There are two ways for you to update the NVR: you can use update tool of the Windows or the flash drive. Please visit our website or contact our technical engineer to get the update tool for Windows. You can use REC upgrade or ConfigTool.

  • Page 81: Web Operation

    5 WEB OPERATION 5.1 General Introduction The device web provides channel monitor menu tree, search, alarm setup, system setup, PTZ control and monitor window. 5.1.1 Preparation Before log in, please make sure:  PC and NVR connection is OK.  You have set PC IP address, NVR IP address, subnet mask and gateway.

  • Page 82: Lan Mode

    Figure 5-2 IE Safety Setup After installation, the interface is shown as below. See Figure 5-1. Please input your user name and password. Default factory name is admin and password is admin. Note: For security reasons, please modify your password after you first login. Figure 5-1 5.2 LAN Mode For the LAN mode, after you logged in, you can see the main window.
  • Page 83 Figure 5-2 This main window can be divided into the following sections.  Section 1: there are five function buttons: Live（chapter 5.3）, setup (chapter 5.7), info (chapter 5.8) , playback (chapter 5.9), alarm (chapter 5.10), and logout (chapter 5.11).  Section 2: There are connected channel numbers.

  • Page 84: Real-Time Monitor

     Section 4: Instant record button. Click it, the button becomes yellow and system begins manual record. See Figure 5-5. Click it again, system restores previous record mode. Figure 5-5  Section 5: Local play button. The Web can playback the saved (Extension name is dav) files in the PC-end. Click local play button, system pops up the following interface for you to select local play file.

  • Page 85: Ptz

    3 4 5 Figure 5-8  1: Digital zoom: Click this button and then left drag the mouse in the zone to zoom in. right click mouse system restores original status.  2: Local record. When you click local record button, the system begins recording and this button becomes highlighted.

  • Page 86: Image/Alarm Out

    Parameter Function You can turn on or turn off the light/wiper. Light and wiper 3D Intelligent Positioning You can click this icon to display or hide the PTZ control platform. Figure 5-9 5.5 Image/Alarm out Select one monitor channel video and then click Image button in section 8, the interface is shown as Figure 5-10.

  • Page 87: Alarm Output

    Figure 5-10 5.5.2 Alarm output Here you can enable or disable the alarm signal of the corresponding port. See Figure 5-11. Figure 5-11 5.6 WAN Login In WAN mode, after you logged in, the interface is shown as below. See Figure 5-12.
  • Page 88 Figure 5-12 Please refer to the following contents for LAN and WAN login difference. 1) In the WAN mode, system opens the main stream of the first channel to monitor by default. The open/close button on the left pane is null. 2) You can select different channels and different monitor modes at the bottom of the interface.

  • Page 89: Setup

    Important The window display mode and the channel number are by default. For example, for the 16- channel, the max window split mode is 16. 3) Multiple-channel monitor, system adopts extra stream to monitor by default. Double click one channel, system switches to single channel and system uses main stream to monitor. You can view there are two icons at the left top corner of the channel number for you reference.
  • Page 90 Figure 5-15 Please refer to the following sheet for log parameter information. Parameter Function Click Device search button, you can view the searched device Device information on the list. It includes device IP address, port, device search name, manufacturer and type. Select a device in the list and then click Add button, system can connect the device automatically and add it to the Added device list.
  • Page 91 Parameter Function Click it, the interface is shown as in Figure 5-15. Here you can add Manual network camera manually. You can select a channel from the dropdown list (Here only shows disconnection channel.) Note:  System supports manufactures such as Panasonic, Sony, Dynacolor, Samsung, AXIS, Arecont, Dahua and Onvif standard protocol.
  • Page 92 The larger the number is , the bright the video is. When you input the value here, the bright section and the dark section of the video will be adjusted accordingly. You can use this function when the whole video is too dark or too bright. Please note the video may become hazy if the value is too high.
  • Page 93 It is to disable the BLC function. Please note this function is disabled by default. Profile It is to set the white balance mode. It has effect on the general hue of the video. This function is on by default. You can select the different scene mode such as auto, sunny, cloudy, home, office, night, disable and etc to adjust the video to the best quality.
  • Page 94 Parameter Function Channel Please select a channel from the dropdown list. Video enable Check the box here to enable extra stream video. This item is enabled by default. Code stream It includes main stream, motion stream and alarm stream. You type can select different encode frame rates form different recorded events.
  • Page 95 Figure 5-18 Please refer to the following sheet for detailed information. Parameter Function There are two modes: Regular (schedule) and Trigger. Snapshot type  Regular snapshot is valid during the specified period you set.  Trigger snapshot only is valid when motion detect alarm, tampering alarm or local activation alarm occurs.
  • Page 96 Figure 5-19 Please refer to the following sheet for detailed information. Parameter Function Cover-area  Check Preview or Monitor first. Click Set button, you can privacy mask the specified video in  the preview or monitor video.  System max supports 4 privacy mask zones. Time Title You can enable this function so that system overlays time ...
  • Page 97 Figure 5-20 5.7.1.4 Channel Name Here you can set channel name. See Figure 5-21. Figure 5-21...

  • Page 98: Network

    5.7.1.5 IPC Upgrade Here you can upgrade network camera. See Figure 5-21. Select a network camera you want to upgrade and then click browse button to select upgrade file. Click start upgrade button to begin upgrade process. You can see the corresponding dialogue box after the upgrade is finish.
  • Page 99 Figure 5-23 Figure 5-24 Please refer to the following sheet for detailed information. Parameter Function Network Mode It includes multiple address, fault tolerance, and load balancing.  Multiple-address mode: eth1 and eth2 and etc operate separately (Max support 4 network ports). You can use the services such as HTTP, RTP service via eth1/2/3/4.
  • Page 100 as DHCP, email, FTP and etc.  Network fault-tolerance: In this mode, device uses bond0 to communicate with the external devices. You can focus on one host IP address. At the same time, you need to set one master card. Usually there is only one running card (master card).System can enable alternate card when the master card is malfunction.
  • Page 101 Figure 5-25 Please refer to the following sheet for detailed information. Parameter Function Max connection It is the max Web connection for the same device. The value ranges from 1 to 120. The default setup is 120. TCP port The default value is 37777. You can input the actual port number if necessary.
  • Page 102 Figure 5-26 5.7.2.4 DDNS The DDNS interface is shown as in Figure 5-27. The DDNS is to set to connect the various servers so that you can access the system via the server. Please go to the corresponding service website to apply a domain name and then access the system via the domain.
  • Page 103 Parameter Function Password The password you input to log in the server. Update period Device sends out alive signal to the server regularly.   You can set interval value between the device and DDNS server here. Quick DDNS and Client-end Introduction 1) Background Introduction Device IP is not fixed if you use ADSL to login the network.
  • Page 104 Figure 5-28 5.7.2.6 Email The email interface is shown as in Figure 5-29. Figure 5-29 Please refer to the following sheet for detailed information. Parameter Function Please check the box here to enable email function. Enable Input server address and then enable this function. SMTP Server Port Default value is 25.
  • Page 105 Parameter Function Anonymity For the server supports the anonymity function. You can auto login anonymously. You do not need to input the user name. password and the sender information. The user name of the sender email account. User Name The password of sender email account. Password Sender email address.
  • Page 106 Figure 5-30 5.7.2.8 SNMP The SNMP interface is shown as in Figure 5-31. The SNMP allows the communication between the network management work station software and the proxy of the managed device. It is reserved for the 3 party to develop. Figure 5-31 Please refer to the following sheet for detailed information.
  • Page 107 Parameter Function and the proxy are the same. The read community will read all the objects the SNMP supported in the specified name. The default setup is public. It is a string. It is a command between the manage process Write Community and the proxy process.
  • Page 108 Figure 5-33 5.7.2.11 Alarm Centre The alarm centre interface is shown as below. See Figure 5-34. This interface is reserved for you to develop. System can upload alarm signal to the alarm centre when local alarm occurs. Before you use alarm centre, please set server IP, port and etc. When an alarm occurs, system can send out data as the protocol defined, so the client-end can get the data.
  • Page 109 Figure 5-35 5.7.2.12.1 Create Server Certificate If it is your first time to use this function, please follow the steps listed below. In Figure 5-35, click button, input country name, state name and etc. Click Create button. See Figure 5-36. Note Please make sure the IP or domain information is the same as your device IP or domain name.
  • Page 110 Figure 5-38 Click Open button, you can go to the following interface. See Figure 5-39. Figure 5-39 Click Install certificate button, you can go to certificate wizard. See Figure 5-40.
  • Page 111 Figure 5-40 Click Next button to continue. Now you can select a location for the certificate. See Figure 5-41. Figure 5-41 Click Next button, you can see the certificate import process is complete. See Figure 5-42.
  • Page 112 Figure 5-42 Click Finish button, you can see system pops up a security warning dialogue box. See Figure 5-43. Figure 5-43 Click Yes button, system pops up the following dialogue box, you can see the certificate download is complete. See Figure 5-44. Figure 5-44 5.7.2.12.3 View and set HTTPS port From Setup->Network->Connection, you can see the following interface.
  • Page 113 Figure 5-45 5.7.2.12.4 Login Open the browser and then input https://xx.xx.xx.xx:port. xx.xx.xx.xx: is your device IP or domain mane. Port is your HTTPS port. If you are using default HTTPS value 443, you do not need to add port information here. You can input https://xx.xx.xx.xx to access.

  • Page 114: Event

    Parameter Function Port ISCSI server port. Default setup is 3260. Path It is to set remote path. Click browse button to select. Note Each path is a iSCSI share disk. The path is already there when you create on the server. After you set server IP, port, user name, password and path, click Add button to add new information on the list.
  • Page 115 Figure 5-48 Figure 5-49...
  • Page 116 Figure 5-50 Figure 5-51...
  • Page 117 Figure 5-52 Please refer to the following sheet for detailed information. Parameter Function Enable You need to check the box to enable motion detection function. Please select a channel from the dropdown list. Period  Motion detection function becomes activated in the specified periods.
  • Page 118 Parameter Function message screen if you enabled this function. Buzzer Check the box here to enable this function. The buzzer beeps when an alarm occurs. Alarm upload System can upload the alarm signal to the centre (Including alarm centre. Message When 3G network connection is OK, system can send out a message when motion detect occurs.
  • Page 119 The tampering interface is shown as in Figure 5-54. After analysis video, system can generate a tampering alarm when the detected moving signal reached the sensitivity you set here. For detailed setups, please refer to chapter 5.7.3.1.1 motion detect for detailed information. Figure 5-54 5.7.3.2 Alarm Before operation, please make sure you have properly connected alarm devices such as...
  • Page 120 Figure 5-56 Figure 5-57 Please refer to the following sheet for detailed information. Parameter Function Enable You need to check the box to enable this function. Please select a channel from the dropdown list. Period This function becomes activated in the specified ...
  • Page 121 Parameter Function Click OK button, system goes back to local alarm  interface, please click save button to exit. System only memorizes one event during the anti-dither Anti-dither period. The value ranges from 5s to 600s. There are two options: NO/NC. Sensor type Record channel System auto activates motion detection channel(s) to...
  • Page 122 Parameter Function Figure 3-48. Snapshot You need to click setup button to select snapshot channel. See Figure 3-49． PTZ Activation Here you can set PTZ movement when alarm occurs. Such as go to preset X. 5.7.3.2.2 IPC External Alarm The IPC external alarm interface is shown as in Figure 5-58. For detailed information, please refer to chapter 5.7.3.2.1.
  • Page 123 Figure 5-59 5.7.3.3 Abnormality It includes seven statuses: No disk, disk error, disk no space, net disconnection, IP conflict and MAC conflict and power fault. See Figure 5-60 through Figure 5-66. Figure 5-60 Figure 5-61...
  • Page 124 Figure 5-62 Figure 5-63 Figure 5-64 Figure 5-65 Figure 5-66 Please refer to the following sheet for detailed information. Parameter Function Event The abnormal events include: No disk, disk error, disk no space, net  Type disconnection, IP conflict, MAC conflict and power fault. You can set one or more items here.

  • Page 125: Storage

    Parameter Function Show System can pop up a message to alarm you in the local host screen if message you enabled this function. Alarm System can upload the alarm signal to the centre (Including alarm upload centre. Send If you enabled this function, System can send out an email to alert you Email when an alarm occurs.
  • Page 126 Figure 5-68 Figure 5-69 Please refer to the following sheet for detailed information.
  • Page 127 Parameter Function Channel Please select a channel from the dropdown list.  Pre-record Please input pre-record time here. The value ranges from 0 to 30.  Redundancy Check the box here to enable redundancy function. Please note this function is null if there is only one HDD. Snapshot Check the box here to enable snapshot function.
  • Page 128 Figure 5-71 5.7.4.2.3 The FTP interface is shown as in Figure 5-72. The FTP function is on if you check the Enable box here. When network is offline or malfunction, system can save record or picture to HDD. Figure 5-72 5.7.4.3 Manual Record The interface is shown as in Figure 5-73.
  • Page 129 Figure 5-73 Please refer to the following sheet for detailed information. Parameter Function Here you can view channel number. Channel The number displayed here is the max channel amount of your device. Status There are three statuses: schedule, manual and stop. System enables auto record function as you set in record schedule Schedule setup (general, motion detect and alarm).

  • Page 130: Setting

    Here you can set HDD for specified channel record. Please select from the HDD group dropdown list. See Figure 5-75. Figure 5-75 5.7.5 Setting 5.7.5.1 General The general interface includes general, date/time and holiday setup. 5.7.5.1.1 General The general interface is shown as in Figure 5-76. Figure 5-76 Please refer to the following sheet for detailed information.
  • Page 131 empty, then system stops recording, If the current HDD is full and then next HDD is not empty, then system overwrites the previous files. Click it to sync network camera time. IPC sync 5.7.5.1.2 Date and time The date and time interface is shown as in Figure 5-77 Figure 5-77 Please refer to the following sheet for detailed information.
  • Page 132 You can set the time server address. NTP server It is to set the time server port. Port It is to set the sync periods between the device and the time server. Interval 5.7.5.1.3 Holiday Setup Holiday setup interface is shown as in Figure 5-78. Here you can click Add box to add a new holiday and then click Save button to save.
  • Page 133 Figure 5-79 Add user: It is to add a name to group and set the user rights. See Figure 5-80. There are four default users: admin/888888/666666 and hidden user “default”. Except user 6666, other users have administrator right. The user 666666 can only have the monitor rights,. Hidden user “default”...
  • Page 134 Modify user It is to modify the user property, belonging group, password and rights. See Figure 5-81. Modify password It is to modify the user password. You need to input the old password and then input the new password twice to confirm the new setup. Please click the OK button to save. Please note, the password ranges from 1-digit to 6-digit.
  • Page 135 Add group: It is to add group and set its corresponding rights. See Figure 5-83. Please input the group name and then check the box to select the corresponding rights. It includes: shutdown/reboot device, live view, record control, PTZ control and etc. Figure 5-83 Modify group Click the modify group button, you can see an interface is shown as in Figure 5-84.
  • Page 136 Figure 5-85 Please refer to the following sheet for detailed information. Parameter Function Output format System supports HDMI1+HDMI2. It is to select output screen No. Screen No. There are four options: 1920×1080, 1280×1024(default), Resolution 1280×720, 1024×768. Please note the system needs to reboot to activate new setup.
  • Page 137 Figure 5-86 5.7.5.5 Default Figure 5-87 The default setup interface is shown as in Here you can select Network/Event/Storage/Setting/Remote device. Or you can check the All box to select all items. Figure 5-87 5.7.5.6 Import/Export The interface is shown as in Figure 5-88. Figure 5-88 Please refer to the following sheet for detailed information.
  • Page 138 Parameter Function It is to import the local setup files to the system. Import It is to export the corresponding WEB setup to your local PC. Export 5.7.5.7 Auto maintenance The auto maintenance interface is shown as in Figure 5-89. Here you can select auto reboot and auto delete old files interval from the dropdown list.

  • Page 139: Information

    Figure 5-91 5.8 Information 5.8.1 Version The version interface is shown as in Figure 5-92. Here you can view record channel, alarm input/output information, software version, release date and etc. Please note the following information is for reference only. Figure 5-92 5.8.2 Log Here you can view system log.

  • Page 140: Online User

    Figure 5-93 Please refer to the following sheet for log parameter information. Parameter Function Log types include: system operation, configuration operation, data Type operation, event operation, record operation, user management, log clear. Set the start time of the requested log. Start time Set the end time of the requested log.

  • Page 141: Hdd Info

    5.8.4 HDD Info It is to view HDD information. See Figure 5-95. Figure 5-95 5.9 Playback Click Playback button, you can see an interface is shown as in Figure 5-96. Please set record type, record date, window display mode and channel name. You can click the date on the right pane to select the date.
  • Page 142 Figure 5-97 Select a file you want to play and then click Play button, system can begin playback. You can select to playback in full-screen. Please note for one channel, system can not playback and download at the same time. You can use the playback control bar to implement various operations such as play, pause, stop, slow play, fast play and etc.
  • Page 143 Figure 5-98 Load more It is for you to search record or picture. You can select record channel, record type and record time to download. See Figure 5-99.
  • Page 144 Figure 5-99 Remote backup In Figure 5-99, there is a remote back pane at the left bottom of the pane. It allows you to backup the record or picture to your local USB storage media via the Web remotely. Click the search button;...

  • Page 145: Alarm

    Now you can see system begins backup and the Stop backup button becomes valid. You can click it to terminate current operation. At the bottom of the interface, there is a process bar for your reference. Watermark Please select a file and then click Verify button to see the file has been tampered with or not 5.10 Alarm Click alarm function, you can see an interface is shown as Figure 5-101.

  • Page 146: Log Out

    5.11 Log out Click log out button, system goes back to log in interface. See Figure 5-102. You need to input user name and password to login again. Figure 5-102...

  • Page 147: Appendix H Toxic Or Hazardous Materials Or Elements

    Appendix H Toxic or Hazardous Materials or Elements Toxic or Hazardous Materials or Elements Component Name Cr VI PBDE Sheet ○ ○ ○ ○ ○ ○ Metal(Case) Plastic Parts ○ ○ ○ ○ ○ ○ （Panel） ○ ○ ○ ○ ○...

Table of Contents