IC Realtime 1U Series User Manual page 58

Period: Click set button, you can see an interface is shown as in Figure 4-20
set for business day and non-business day. In Figure 4-20
interface is shown as in Figure 4-21. Here you can set your own setup for business day and
non-business day.
Anti-dither: Here you can set anti-dither time.
Alarm output: when alarm occurred, system enables peripheral alarm devices.
Tour: Here you can enable tour function when alarm occurs. It is a one-window tour. Please
go to chapter 5.3.9 Display for tour interval setup.
Buzzer: Highlight icon to enable this function. The buzzer beeps when alarm occurs.
Please highlight icon
save button, system goes back to the previous menu.
Note:
In motion detection mode, you can not use copy/paste to set channel setup since the video in
each channel may not be the same.
In Figure 4-18, you can left click mouse and then drag it to set a region for motion detection.
Click Fn to switch between arm/withdraw motion detection. After setting, click enter button to exit.
to select the corresponding function. After all the setups please click
Figure 4-17
Figure 4-18
. Here you can
X
, click set button, you can see an
X 3 0 7 H 3 0 7 H 3 0 7 H X
58