Pioneer ANH-P9R Operation Manual page 34

MAN-ANH-P9R-GB.fm Page 34 Tuesday, June 4, 2002 1:39 PM
=
>
?
@
A
The built-in CD player plays one standard 12 cm or 8 cm (single) CD at a time. Do not
use an adapter when playing an 8 cm CD.
The navigation CD must be inserted to start the route calculation. During the
calculation, the prompt CD flashes on the display. Once the calculation has been
completed, the prompt CD extinguishes, the navigation CD can be removed and an
audio CD can be inserted.
To avoid a malfunction, make sure
that no metal object comes into
contact with the front panel is open.
Rolling the VOLUME changes the volume level.
 

Pressing skips to the start of the next track.

Pressing once skips to the start of the current track. Pressing again will skip to the
previous track.
 
If you press and hold or , you can perform fast forward or reverse.
CD loading slot

button

Be sure to close the front panel after removing the CD.
Ä
You can select CD as the source by pressing
product.
When the front panel is open, multi-function buttons are not available.
Do not insert anything other than a CD into the CD loading slot.
A CD left partially inserted after ejection may incur damage or fall out.
If a CD cannot be inserted fully or playback fails, make sure the recorded side is down. Press

and check the disc for damage before reinserting it.
If the built-in CD player cannot operate properly, an error message (such as "ERROR-14")
appears on the display. Refer to "Understanding built-in CD player error messages" on page
53.

You can eject the CD by pressing and holding with opening the front panel when the CD
loading or ejecting cannot operate properly.
After choosing your destination, press and you can listen to the guide voice during
navigation guidance.
When new traffic information arrives, appears. If desired, check the new information.
When playing a CD TEXT disc, you can switch text display such as artist name and
track title.
With text longer than 24 letters, you can scroll to see the rest of the text.
TTL1 Displays disc title and track title.
TTL2 Displays disc title and disc artist name.
TTL3 Displays track title and track artist name.
SCROLL Scrolls the displayed title.
If you do not operate the function within about eight seconds, the display is automatically
returned.
 
You cannot use or to select a track in title mode.
The titles are displayed up to 24 letters long.
A CD TEXT disc is a CD featuring recorded text information such as disc title, artist name
and track title.
If certain text information is not recorded on a CD TEXT disc, "No ~" (e.g., "No title") is
displayed.
If you have not input disc titles, "No title" is displayed.
when an audio disc is loaded in this