Pioneer ANH-P9R Operation Manual page 8

Navigation/cd tuner
Hide thumbs Also See for ANH-P9R:
Table of Contents

Advertisement

MAN-ANH-P9R-GB.fm Page 8 Tuesday, June 4, 2002 1:39 PM
This product features two demonstration modes. One is the reverse mode, the other
is the feature demo mode.
If you do not perform an operation within about 30 seconds, screen indications start to
reverse, and then continue reversing every 10 seconds. Pressing 5 numbered button
when power to this product is switched off while the ignition switch is set to ACC or ON
cancels the reverse mode. Press 5 numbered button again to start the reverse mode.
The feature demo automatically starts when power to this product is switched off while
the ignition switch is set to ACC or ON. Pressing 6 numbered button during feature
demo operation cancels the feature demo mode. Press 6 numbered button again to
start the feature mode. Remember that if the feature demo continues operating when
the car engine is switched off, it may drain battery power.
You cannot cancel a demo mode when the front panel is open.
The red lead (ACC) of this product should be connected to a terminal coupled with ignition
switch on/off operations. If this is not done, the vehicle battery may be drained.
When the source is off, you can
check the location of "5" and "6" by
turnig on the feature demo.
=
?
Press to open the front panel.
@
Lets you adjust guidance
volume level.
Press to select among three FM or
Displays information
MW/LW bands and cancel the control
indications.
mode of functions.
A
Lets you adjust the volume
Press
level of each source.
functions of the multi-function buttons.
B
Lets you cancel each function
during operation.
>
Press to select functions.
C
Pressing
Lets you select an item.
menu or mode and returns to the

Lets you select an item.
previously selected menu or mode.
D
Lets you enter a selected item
and switch functions ON/OFF.
Switches to the main audio display.
Lets you manually adjust.

Lets you manually adjust.
Switches to the main navigation
This unit is switched on by selecting a
display.
source. Press to cycle through all of
the available sources.
to switch through the
cancels the current

Advertisement

Table of Contents
loading

Table of Contents