Table of Contents
Advertisement
Conference Call
The conference call feature allows you to connect up to eight parties,
including yourself, in a telephone conversation. The other parties
besides yourself can be on outside lines or extensions. If a called party
refuses the conference call, is busy, or does not answer, you can
reconnect to the conference. Any party can leave the conference call
by hanging up.
Note: Call the first party, then use the following steps to add each
new party.
Set up a conference call after connecting to the first party as
follows:
1. Press flash.
2. Listen for the pulse tone and the dial tone.
3. Dial the extension number, or
4. Inform the called party that this is a conference call.
5. Press flash again.
6. Talk to the parties.
To add more parties to the conference call, repeat steps 1-6.
Disconnect a specific party from a conference call as follows:
1. Press flash.
2. Listen for the pulse tone and the internal holding tone.
3. Dial
number in the code being the number of the party you want to
disconnect.
4. Press flash to reconnect to the conference call.
Reconnect to a conference if a called party refuses the call, is busy,
or does not answer as follows:
1. Hang up, or wait for the called party to hang up.
2. Talk to the parties.
2-8 Single-Line User Guide
through
4
1
9
and the outside number.
, with the last
8
4
Advertisement
Table of Contents
