Table of Contents
Advertisement
On Version 6.3 and higher, you can also be set up at the
communications server for up to 30 codes, in groups of 10. If you are
set up for more than ten, they follow a double-digit scheme (00 through
29).
A dialing sequence can be an extension number, an outside number, a
feature access code (or feature key), or a combination of numbers and
feature access codes up to 22 characters.
Setting Up or Changing a Station Speed Code
This section gives you the steps to set up or change a station speed
code.
Set up or change a station speed code as follows:
1. Lift the receiver.
2. Listen for the dial tone.
3. Dial
3
4. Listen for the confirmation tone.
5. Dial the station speed code (0 through 9, or 00 through 29 if you
are set up for more than 10 codes).
6. Dial the extension number.
OR
Dial
and the outside number.
9
7. Hang up.
Placing a Station Speed Call
This section gives you the steps to place a station speed code.
Place a station speed call as follows:
1. Lift the receiver.
2. Listen for the dial tone.
3. Dial
.
3
4. Dial the station speed code.
.
System Features 2-15
Advertisement
Table of Contents
