Section 3. Using The Equipment On/Off Menu; Equipment On/Off; Filter Pump - Jandy AquaLink RS Owner's Manual

Page 8
Section 3. Using the Equipment On/Off Menu

3.1 Equipment On/Off

Use this menu to manually turn a piece of equipment on or off. The ALL OFF mode will turn off equipment that
has been turned on by any means (manual or pre-programmed). This includes any of the heater enables that were on
(unless in use by the Maintain function).
3.1.1 To use Equipment On/Off
1. Highlight EQUIPMENT ON/OFF and press SELECT. To highlight an item, use the UP/DOWN arrow keys.
Use the SELECT button to turn the equipment on or off. Return to the main menu by using the BACK button,
or use the UP/DOWN arrow keys to highlight another device.
2. Highlight ALL OFF and press SELECT. After using ALL OFF, return to the main menu by using the BACK
button.

3.2 Filter Pump

The FILTER PUMP selection turns the main filtration pump on or off for circulation to the pool. The filter pump also
activates if the spa is turned on, if the pool cleaner is turned on, or if the spa spill-over effect is activated. The main
filtration pump circulates the pool or spa water through the filter and heater. The pump must be on if you want to
display the pool temperature, or if you want to heat the pool.
See Section 4.3, for 2-speed operation.
3.2.1 To use Filter Pump
Highlight FILTER PUMP and press SELECT. Use the SELECT button to turn the equipment on or off.
EQUIPMENT
ALL OFF
FILTER PUMP OFF
SPA OFF
POOL HEAT OFF
SPA HEAT OFF
AUX 1 OFF
AUX 2 OFF
AUX 3 OFF
MORE
OFF
OFF
OFF
OFF
OFF
OFF
OFF
EQUIPMENT
ALL OFF
FILTER PUMP ON
SPA OFF
POOL HEAT OFF
SPA HEAT OFF
AUX 1 OFF
AUX 2 OFF
AUX 3 OFF
MORE