Adjustable Automatic Close-Down; Preparing Machine; Rinsing The Machine; Adjusting Water Volume - Jura IMPRESSA X30 Instructions For Use Manual

Now select the corresponding level with the
and press the switch to store the setting. The warning lamps
go off.
It is only necessary to adjust the water hardness before the
machine is used for the first time or when a different quality
of water is used.
If no water hardness level is changed within 60 seconds, the
display goes out and the last value programmed remains
unchanged.

3.8 Adjustable automatic close-down

You can adjust the automatic close-down of 2 hours set by Jura to
your own requirements. The machine provides 3 different levels:
1st Level
Warning lamp flashes.
The automatic close-down is not activated.
2nd Level
Warning lamp flashes, warning lamps
Automatic close-down is set to 2 hours.
3rd Level
Warning lamp flashes, warning lamps
light up.
Automatic close-down is set to 5 hours.
To set or alter the automatic close-down follow the instructions
below:
Put the mains plug into the wall socket.
Leave the machine switched off.
Press draw-off button for about 3 seconds and choose the
required setting by pressing
Push button to store level in memory
selector switch
, light up.
, , , ,
selector switch.
.
If no change to the setting level is made within 60 seconds,
the warning lamps go out and the last level stored remains
effective.

4. Preparing machine

Switch your machine on with the
The warning lamp and the small light in the steam selector
switch (14) flash.
Place an empty cup under the pivoting nozzle (17).
Turn the selector switch for steam/hot water (15) to the
sition.
Now the machine produce steam followed by water. The water
flow is stopped automatically.
Turn the selector switch for steam/hot water (15) back to the
position.

5. Rinsing the machine

If warning lamp light up, the machine needs rinsing.
Place an empty cup under the coffee-spout (16).
Press rinsing button. The rinsing is stopped automatically.
If the machine has been switched off and has already cooled
down it will be necessary to carry out this rinsing function
when the machine is switched on again. After switching off
the machine, the rinsing sets off automatically.

6. Adjusting water volume

Water volume is infinitely adjustable by means of the selector
switch (3). The small cup means a small volume of water for
espresso, the big cup means a larger volume of water for coffee. ll
cup means a small volume of water for espresso, the big cup
means a larger volume of water for coffee.
switch.
po-
9
E