Problems - Jura IMPRESSA X30 Instructions For Use Manual

17. Problems

Problem
Coffee flow is stopped after
pre-brewing
Grinder is extremely noisy
Not enough froth
If none of the remedies listed above help, please contact your dealer or get in touch with Jura Elektroapparate AG.
16
Cause
– Beans container is empty
– Not enough coffee powder
– Alien element in grinder
– Unsuitable milk-type
– Frothing nozzle blocked
– Frothing nozzle in wrong
Action
– Fill in beans
– Measure powder correctly
– Remove alien elements (Section 11.4)
– Drawing off powder coffee is still possible
– Use full cream milk
– Clean frothing nozzle
– Drawing off steam (see chapter 8)