Table of Contents
Advertisement
Quick Links
Impressa E Quick Reference Guide
This Guide does not replace the Operating Instructions.
For details and cautions you must read all instructions.
Traces of Coffee Grounds in New Machine?
This is normal! Grinder was tested during assembly with beans.
Despite cleaning, traces of ground coffee may be found.
a. On/Off
b. 1-Cup
d. 2-Cup
DIAL
e.
RED TEXT
represents information in the display.
A) First Time Ever Preparation
1. Fill water in tank and beans in bean container.
2. DO NOT install the Water Filter Cartridge now!
3. Push ON/OFF button.
neath the frother and turn the SELECTOR to the water
symbol. FILLING. Water pumps through the frother into
the cup and stops automatically.
SELECTOR to the Cup Symbol.
HEATING.
4. Place a cup underneath the coffee spout and push the
RINSE button. READY. Place a large cup underneath the
coffee spout and press the 1-CUP button. The machine
starts grinding and brews coffee. Discard the first two
cups. READY.
B) Daily Preparation
• Fill fresh water in tank and check bean container.
• Push ON/OFF button: HEATING. RINSE.
• Place a cup under the coffee spouts and press the RINSE
button. READY.
C) Factory Settings:
Filter:
–
Hardness: Level 2
Aroma:
ROBUST
Auto Off:
2 HRS
READY
OPEN
PRESS
RINSE.
f. Rinse
g. Steam
h. Pre-Ground
Coffee
e. P Button
TAP. Place a cup under-
SHUT
SYSTEM
Stats:
Language: English
ML / OZ:
Rinse:
Selector
b
a. Cup
b. Steam / Water
TAP. Turn the
FILLING.
OZ.
a
Advertisement
Table of Contents
Related Manuals for Jura Impressa E
Summary of Contents for Jura Impressa E
- Page 1 Impressa E Quick Reference Guide This Guide does not replace the Operating Instructions. For details and cautions you must read all instructions. Traces of Coffee Grounds in New Machine? This is normal! Grinder was tested during assembly with beans. Despite cleaning, traces of ground coffee may be found.
- Page 2 D) Grinding and Brewing • Push the DIAL. Display shows the cup size, e.g. 4.0 OZ. • Turn the DIAL to change the cup size from 8.0 OZ. • Push the 1-CUP button once: MILD, twice NORMAL, three times STRONG. •...
- Page 3 J) Programming Push and hold the P button until the display shows FILTER Turn the DIAL to access the other functions: HARDNESS, AROMA, AUTO OFF, STATS, LANGUAGE, ML/OZ, RINSE Select the function, push the DIAL, turn DIAL to see or select option.
- Page 4 N) Decalcifying DESCALE MACHINE / MACHINE READY For different water hardness levels see Operating Instructions. If a water hardness level is selected, the decalcifying monitor is active. Decalcify when above message appears. Important: If you use the Clearyl Filter and the above message appears, then the Clearyl Installation procedure was not performed properly.
Need help?
Do you have a question about the Impressa E and is the answer not in the manual?
Questions and answers