Attachment; Speaker-Microphone - Icom IC-F61 Instruction Manual

Vhf/uhf transceiver

Hide thumbs Also See for IC-F61:

Table of Contents

I Attachment

Attach the connector of the speaker-microphone into the [SP MIC]

connector on the transceiver and tighten the screw.

IMPORTANT: KEEP the [SP MIC] jack cover attached (trans-

ceiver) when the speaker-microphone is not in use. Water will

not get into the transceiver even if the cover is not attached,

however, the terminals (pins) will become rusty, or the trans-

ceiver will function abnormally if the connector becomes wet.

CAUTION: Attach the

speaker-microphone s

connector securely to pre-

vent accidental dropping,

or water intrusion in the

connector.

Table of Contents

Need help?

Do you have a question about the IC-F61 and is the answer not in the manual?

Ic-f51