User Set Mode - Icom IC-F61V Instruction Manual

3
BASIC OPERATION
I User set mode
User set mode is accessed at power ON and allows you to set sel-
dom-changed settings. You can "customize" the transceiver opera-
tion to suit your preferences and operating style.
Entering the user set mode:
q While pushing and holding [
ON.
• Turn power OFF in advance.
• "SET MODE" appears for 1 sec.
w Push and hold [P0] for 1 sec. to enter user set mode.
e Push [P0] momentarily to select the appropriate item.
Then push [
• Available set mode functions are Backlight, Beep, SQL Level,
Ringer Level, AF Min level, Mic Gain, VOX Gain*, VOX Delay*,
Battery Voltage, Signal Moni, Vibration and Lone Worker.
r Push and hold [P0] again to exit set mode.
* Appears when the optional headset is connected.
User set mode is also available using a programmable key. Please
refer to p. 13 [User Set Mode] section for instructions regarding
using the key assigned for user set mode.
NOTE: [
regardless of the assigned key functions.
20
] or [ ] to set the desired level/condition.
], [ ] and [P0] activate while in the user set mode
] and [ ], rotate [VOL] to power